AUT Journal of Mechanical Engineering

Number of Articles: 296

Articles in Press: ALL Accepted Manuscript Corrected Proof

The Formation Mechanism of Iron Aluminide Phases in Fe-Al System with Different Raw Materials Ratio

Volume 4, Issue 3, Summer 2020, Pages 407-414

10.22060/ajme.2019.16739.5831

Razieh Khoshhal, Ali Hossein zadeh

Triply Periodic Minimal Surfaces Scaffolds and Their Comparison with Cancellous Bone: Fluid Flow Point of View‎

Volume 6, Issue 3, Summer 2022, Pages 443-466

10.22060/ajme.2022.20549.6005

Ali Parandvash, Morteza Rezaei, Ehsan Khavasi

Numerical investigation of cardiac function parameters in left heart hemodynamics with stenosed mitral

Volume 5, Issue 3, Summer 2021, Pages 465-476

10.22060/ajme.2020.18606.5906

Maysam Saidi, Reza Samian

Analysis and Optimization of Fibre-Metal Laminate Cylindrical Shells Subjected to Transverse Impact Loads

Volume 4, Issue 4, Autumn 2020, Pages 535-552

10.22060/ajme.2020.16490.5820

Reza Azarafza, Ali Davar

Series Flat Plate Pulsating Heat Pipe: Fabrication and Experimentation

Volume 5, Issue 4, Autumn 2021, Pages 639-654

10.22060/ajme.2021.19402.5947

Amir Hassan Ekrami, Majid Sabzpooshani, Mohammad Behshad Shafii

Investigation of Die Clearance in Rubber Pad Forming of Metallic Bipolar Plates

Volume 1, Issue 1, Spring 2017, Pages 89-98

10.22060/mej.2016.719

M. Elyasi, F. Ahmadi Khatir, M. Hosseinzadeh

The Buckling Analysis of Conical Sandwich Shells with Temperature Dependent Properties and an Improved High-Order Theory

Volume 3, Issue 1, May 2019, Pages 95-106

10.22060/mej.2017.13428.5630

J. seidi, S.M.R. Khalili

The Effect of Impact Energy Parameters on the Closed-Cell Aluminum Foam Crushing Behavior Using X-Ray Tomography Method

Volume 2, Issue 1, June 2018, Pages 107-116

10.22060/mej.2017.13385.5613

S. Talebi, M. Sadighi, M. M. Aghdam

Effects of Functionalized Multi-Walled Carbon Nanotubes on the Low-Velocity Impact Response of Sandwich Plates

Volume 4, Issue 1, Winter 2020, Pages 119-126

10.22060/ajme.2019.15312.5771

Ehsan Rashidi, Saeid Feli

Convection Enhancement Using Composite Vortex Generator

Volume 6, Issue 1, Winter 2022, Pages 149-164

10.22060/ajme.2021.20158.5992

S. A. Gandjalikhan Nassab, M Moein Addini

Assessment of Fountain Flow Effects on Two Non-Overlap Tandem Rotors Performance

Volume 5, Issue 1, Winter 2021, Pages 173-190

10.22060/ajme.2020.17224.5850

Ali Mehrabi, Ali R. Davari

Computational Investigation of Unsteady Compressible Flow over a Fixed Delta Wing Using Detached Eddy Simulation

Volume 1, Issue 2, Autumn 2017, Pages 219-232

10.22060/mej.2017.12863.5455

H. Ansarian, M. Hadidoolabi

Fatigue Life Evaluation of Single and Two Riveted Coach Peel Joints Using Strain- Life Criteria

Volume 3, Issue 2, December 2019, Pages 229-234

10.22060/ajme.2019.14541.5731

Hadi Moslemi, Khalil Farhangdoost, Pedram Zamani

Determining a Suitable Location for Wind Turbines Using Inverse Solution and Mast Data in a Mountainous Terrain

Volume 2, Issue 2, December 2018, Pages 243-252

10.22060/ajme.2018.13813.5319

A.H. ZARE, R. Mehdipour, E. Mohammadi

IInverse Problem of Coupled Radiative and Conductive Heat Transfer in a Cavity Filled with CO2 and H2O at Different Mole Fractions

Volume 4, Issue 2, Spring 2020, Pages 267-276

10.22060/ajme.2019.15613.5783

Mohammad Omidpanah, S.Abdol Reza Gandjalikhan Nassab

Combined Action of Gas Radiation and Airfoil Shaped Ribs in Improvement of Solar Heater Performance

Volume 6, Issue 2, Spring 2022, Pages 293-312

10.22060/ajme.2021.20440.6003

S. A. Gandjalikhan Nassab

Synthesis of a pure FeAl with a density greater than 95% of theoretical density by optimizing effective factors

Volume 5, Issue 2, Spring 2021, Pages 329-340

10.22060/ajme.2021.18021.5881

Razieh Khoshhal, Hojjat Mirzaei-Ghasabe, Ali Hosseinzadeh

Modeling and Optimization of Flux Assisted Tungsten Inert Gas Welding Process Using Taguchi Method and Statistical Analysis

Volume 4, Issue 3, Summer 2020, Pages 415-424

10.22060/ajme.2019.16890.5839

Masoud Azadi Moghaddam, Farhad Kolahan

A Parametric Investigation of Melting Process within a Porous Medium under Local Thermal Non-Equilibrium Condition Using Lattice Boltzmann Method

Volume 6, Issue 3, Summer 2022, Pages 467-488

10.22060/ajme.2022.20383.5997

Mohammad Taghilou, Seyed Alireza Safavi

Experimental investigation on laminar convective heat transfer of nano ferrofluids under constant and alternating magnetic field

Volume 5, Issue 3, Summer 2021, Pages 477-494

10.22060/ajme.2020.18628.5908

Matin Ghadiri, omid haghani, Erfan Emam-jomeh, Ebrahim Barati

Theoretical and Numerical Analysis of Jamming Phenomenon in Positioning of Circular Workpiece on Horizontal Surface

Volume 4, Issue 4, Autumn 2020, Pages 553-564

10.22060/ajme.2020.16132.5806

Hadi Parvaz

Investigation of Gas Radiation Effect on Thermal Behavior of Solar Gas Heaters under High Irradiation

Volume 5, Issue 4, Autumn 2021, Pages 655-668

10.22060/ajme.2021.19585.5954

S. A. Gandjalikhan Nassab, Maryam Moein Addini

An Investigation of the Effects of Crack on the Zone of Pull-in Suppression in MicroElectromechanical Systems Using High-Frequency Excitation

Volume 1, Issue 1, Spring 2017, Pages 99-108

10.22060/mej.2016.803

R. Hassannejad, Sh. Amiri Jahed

Optimization of Hot Metal Gas Forming by Taguchi Method for Production Step-tubes from AA6063

Volume 3, Issue 1, May 2019, Pages 107-112

10.22060/ajme.2018.14283.5719

M. Rajaee, S. J. Hosseinipour, H. Jamshidi Aval

Multi-objective Optimization of Surface Roughness and Material Removal Rate Using an Improved Self-Adaptive Particle Swarm Optimization Algorithm in Milling process

Volume 2, Issue 1, June 2018, Pages 117-124

10.22060/ajme.2018.12581.5373

M. M. Abootorabi

Journal Archive

Volume 10 (2026)

Volume 9 (2025)

Volume 8 (2024)

Volume 7 (2023)

Volume 6 (2022)

Volume 5 (2021)

Volume 4 (2020)

Volume 3 (2019)

Volume 2 (2018)

Volume 1 (2017)