Abbasi, Naser Investigation of Laser Induced Plasma Assisted Ablation of Glass in Presence of Magnetic Field [Volume 6, Issue 3, 2022, Pages 401-414]
Abedi, Maryam Transient Response of Laminated Composite Curved Beams with General Boundary Conditions under Moving Force [Volume 6, Issue 4, 2022, Pages 561-578]
Abedi, Mohsen An Experimental Study on Fuzzy Controller Robustness Augmented by Fuzzy Supervisor for Cutting Force Control of End-Milling [Volume 6, Issue 2, 2022, Pages 167-178]
Adingwupu, A. Evaluation of Micropolar Fluid Transport through Penetrable Medium: Effect of Flow and Thermal Slip [Volume 6, Issue 3, 2022, Pages 427-442]
Ahangari, Maryam Numerical Simulation of Blood Flow in a Stented Aneurysm Using Lattice Boltzmann Method [Volume 6, Issue 2, 2022, Pages 229-248]
Ahmadi, Ahmad Fluid-Structure Interaction During Viscoelastic Fluid Hammer Phenomenon in the Pipes [Volume 6, Issue 1, 2022, Pages 95-112]
Ahmadi, Ali Transient Response of Laminated Composite Curved Beams with General Boundary Conditions under Moving Force [Volume 6, Issue 4, 2022, Pages 561-578]
Akinshilo, A. T.Evaluation of Micropolar Fluid Transport through Penetrable Medium: Effect of Flow and Thermal Slip [Volume 6, Issue 3, 2022, Pages 427-442]
Amiri-Jaghargh, Ali Direct Simulation Monte Carlo Analysis of Flow in Knudsen Pumps with Square-Shaped Wall Roughness [Volume 6, Issue 1, 2022, Pages 77-94]
Arab Solghar, Alireza Experimental Study on the Wear of Liner in Tumbling Mill under Dry and Wet Conditions [Volume 6, Issue 3, 2022, Pages 331-340]
B
Barati, Fariborz Accurate Estimating of Mechanical Properties of Austenitic Stainless Steels with Residual Stresses Using Indentation Technique [Volume 6, Issue 4, 2022, Pages 511-524]
Bayareh, Morteza Numerical Study of Kelvin-Helmholtz Instability of Newtonian and Non-Newtonian Fluids [Volume 6, Issue 2, 2022, Pages 249-260]
Behroozsarand, Alireza Hybrid Neural Network and Particle Swarm Optimization Model Applied to Assist Production Planning in a Large Petrochemical Plant [Volume 6, Issue 4, 2022, Pages 491-510]
Beigzadeh, Borhan Synthesis of a Six-Link Mechanism for Generating the Ankle Motion Trajectory Using Shadow Robot Control Method [Volume 6, Issue 2, 2022, Pages 189-200]
Bruijn, Sjoerd MComprehensive Evaluation of Human Hand Manipulability During Walking at Different Speeds [Volume 6, Issue 2, 2022, Pages 179-188]
D
Danesh, Mohammad Design of Robust Proportional-(Proportional-Derivative) Controller for an Autonomous Underwater Vehicle Using Quantitative Feedback Theory in the Diving Plane [Volume 6, Issue 3, 2022, Pages 363-386]
Davari, Ali R. Impact of Canard on the Flowfield over the Wing in Various Flow Regimes [Volume 6, Issue 1, 2022, Pages 113-128]
E
Ebadian, Mohammad Numerical and Thermodynamic Study of a Gas Turbine Cycle with Evaporative Cooling [Volume 6, Issue 2, 2022, Pages 279-292]
Esmaeili, Sajad Effects of Shape Memory Alloys and Carbon Nanotubes on the Nonlinear Aerothermal Flutter Characteristics of Hybrid Nanocomposite Beam [Volume 6, Issue 2, 2022, Pages 217-228]
Etemadi, M. Analytical Modeling of the Stretching in the Bimetallic Materials Produced by Equal Channel Angular Pressing [Volume 6, Issue 1, 2022, Pages 3-14]
F
Farajzadeh, Reyhaneh Numerical Study of Kelvin-Helmholtz Instability of Newtonian and Non-Newtonian Fluids [Volume 6, Issue 2, 2022, Pages 249-260]
Feli, Saeed Low Velocity Impact Response of Sandwich Beams with Composite Face-Sheets and Foam or Honeycomb Core: Analytical Modeling and Finite Element Simulation [Volume 6, Issue 3, 2022, Pages 341-362]
G
Gandjalikhan Nassab, S. A. Convection Enhancement Using Composite Vortex Generator [Volume 6, Issue 1, 2022, Pages 149-164]
Gandjalikhan Nassab, S. A. Combined Action of Gas Radiation and Airfoil Shaped Ribs in Improvement of Solar Heater Performance [Volume 6, Issue 2, 2022, Pages 293-312]
Ghassabi, Ghodrat Numerical and Thermodynamic Study of a Gas Turbine Cycle with Evaporative Cooling [Volume 6, Issue 2, 2022, Pages 279-292]
Goudarzi, Sahar Two-Phase Simulation of Magnetohydrodynamics and Ferrohydrodynamics Impacts on the Natural Convection of a Magnetic Nanofluid within a Porous Cavity [Volume 6, Issue 1, 2022, Pages 129-148]
H
Haghjoo, Mohammad Reza Synthesis of a Six-Link Mechanism for Generating the Ankle Motion Trajectory Using Shadow Robot Control Method [Volume 6, Issue 2, 2022, Pages 189-200]
Hajiloo, Amir Comprehensive Evaluation of Human Hand Manipulability During Walking at Different Speeds [Volume 6, Issue 2, 2022, Pages 179-188]
Hakimi, Alireza Effects of Shape Memory Alloys and Carbon Nanotubes on the Nonlinear Aerothermal Flutter Characteristics of Hybrid Nanocomposite Beam [Volume 6, Issue 2, 2022, Pages 217-228]
Hasannezhad, Hossein Experimental Study on Puncture Resistance of 2D and 3D Glass Fabrics Reinforced with Shear Thickening Fluid [Volume 6, Issue 1, 2022, Pages 31-44]
Heidari, Hamidreza Effects of Shape Memory Alloys and Carbon Nanotubes on the Nonlinear Aerothermal Flutter Characteristics of Hybrid Nanocomposite Beam [Volume 6, Issue 2, 2022, Pages 217-228]
Heidari, Mehdi Analysis of the Effect of Indenter Deformation and Presence of Voids on Silicon Nanoindentation Using Molecular Dynamics Simulation [Volume 6, Issue 2, 2022, Pages 201-216]
Hoseini Sarvari, Seyed Masoud Inverse Reconstruction of Absorption-Coefficient Distribution in a Two-Dimensional Radiative Medium from the Knowledge of Wall Heat Fluxes [Volume 6, Issue 3, 2022, Pages 415-426]
Hosseini, Mohammad Stability Analysis of a Functionally Graded Carbon Nanotube Reinforced Composite Plate Integrated with Piezoelectric Layers under Supersonic Airflow [Volume 6, Issue 4, 2022, Pages 525-544]
Hosseini, Seyed Vahid Analysis of the Effect of Indenter Deformation and Presence of Voids on Silicon Nanoindentation Using Molecular Dynamics Simulation [Volume 6, Issue 2, 2022, Pages 201-216]
J
Jahangirian, alireza A New Metaheuristic Method with Applications to Airfoil Shape Optimization [Volume 6, Issue 2, 2022, Pages 261-278]
Jeddi, Mohsen Experimental Study on Puncture Resistance of 2D and 3D Glass Fabrics Reinforced with Shear Thickening Fluid [Volume 6, Issue 1, 2022, Pages 31-44]
Karvan, Poorya Low Velocity Impact Response of Sandwich Beams with Composite Face-Sheets and Foam or Honeycomb Core: Analytical Modeling and Finite Element Simulation [Volume 6, Issue 3, 2022, Pages 341-362]
Khajehzadeh, Mohsen Investigation of Laser Induced Plasma Assisted Ablation of Glass in Presence of Magnetic Field [Volume 6, Issue 3, 2022, Pages 401-414]
Khalafi, Vahid Nonlinear Flutter Analysis of Porous Functionally Graded Plate in Yawed Hypersonic Flow [Volume 6, Issue 1, 2022, Pages 59-76]
Khavasi, Ehsan Triply Periodic Minimal Surfaces Scaffolds and Their Comparison with Cancellous Bone: Fluid Flow Point of View [Volume 6, Issue 3, 2022, Pages 443-466]
L
Lashkarbolook, Mohsen Fluid-Structure Interaction During Viscoelastic Fluid Hammer Phenomenon in the Pipes [Volume 6, Issue 1, 2022, Pages 95-112]
M
Mahdiyar, Nafise Analysis of the Effect of Indenter Deformation and Presence of Voids on Silicon Nanoindentation Using Molecular Dynamics Simulation [Volume 6, Issue 2, 2022, Pages 201-216]
Majidi Jirandehi, aliakbar Experimental Study on the Wear of Liner in Tumbling Mill under Dry and Wet Conditions [Volume 6, Issue 3, 2022, Pages 331-340]
Majidi-Mozafari, Kazem Stability Analysis of a Functionally Graded Carbon Nanotube Reinforced Composite Plate Integrated with Piezoelectric Layers under Supersonic Airflow [Volume 6, Issue 4, 2022, Pages 525-544]
Meshkat, Seyyed Salar Hybrid Neural Network and Particle Swarm Optimization Model Applied to Assist Production Planning in a Large Petrochemical Plant [Volume 6, Issue 4, 2022, Pages 491-510]
Miripour Fard, Behnam Comprehensive Evaluation of Human Hand Manipulability During Walking at Different Speeds [Volume 6, Issue 2, 2022, Pages 179-188]
Mirnezhad, Nadia Direct Simulation Monte Carlo Analysis of Flow in Knudsen Pumps with Square-Shaped Wall Roughness [Volume 6, Issue 1, 2022, Pages 77-94]
Moein Addini, M Convection Enhancement Using Composite Vortex Generator [Volume 6, Issue 1, 2022, Pages 149-164]
Moharrami, Rasoul Accurate Estimating of Mechanical Properties of Austenitic Stainless Steels with Residual Stresses Using Indentation Technique [Volume 6, Issue 4, 2022, Pages 511-524]
N
Naderi, Ali Asghar Blast Resistance of an Innovative Helmet Liner Composed of an Auxetic Lattice Structure [Volume 6, Issue 1, 2022, Pages 45-58]
Navardi, Mohammad Mahdi A Proposed Approach to Simulate Thin Quadrilateral Plates Using Generalized Differential Quadrature Method Based on Kirchhoff–Love Theory [Volume 6, Issue 1, 2022, Pages 15-30]
Norouzi, Banafsheh Fluid-Structure Interaction During Viscoelastic Fluid Hammer Phenomenon in the Pipes [Volume 6, Issue 1, 2022, Pages 95-112]
Norouzi, Mahmood Fluid-Structure Interaction During Viscoelastic Fluid Hammer Phenomenon in the Pipes [Volume 6, Issue 1, 2022, Pages 95-112]
Nouri, Hossein Development of Theoretical Model to calculate Steam Hammer Force on Shock Absorber in Multi Series Pipeline [Volume 6, Issue 3, 2022, Pages 315-330]
P
Parandvash, Ali Triply Periodic Minimal Surfaces Scaffolds and Their Comparison with Cancellous Bone: Fluid Flow Point of View [Volume 6, Issue 3, 2022, Pages 443-466]
Parvaz, Hadi Analysis of the Effect of Indenter Deformation and Presence of Voids on Silicon Nanoindentation Using Molecular Dynamics Simulation [Volume 6, Issue 2, 2022, Pages 201-216]
Q
Qaderi, Alireza Direct Simulation Monte Carlo Analysis of Flow in Knudsen Pumps with Square-Shaped Wall Roughness [Volume 6, Issue 1, 2022, Pages 77-94]
R
Rafeeyan, Mansoor Design of Robust Proportional-(Proportional-Derivative) Controller for an Autonomous Underwater Vehicle Using Quantitative Feedback Theory in the Diving Plane [Volume 6, Issue 3, 2022, Pages 363-386]
Rafiei, Ashkan Numerical Evaluation on Blood Rheological Behavior in a Realistic Model of Aneurysmal Coronary Artery [Volume 6, Issue 4, 2022, Pages 579-596]
Rashidi, Ali Mohammad Analytical Modeling of the Stretching in the Bimetallic Materials Produced by Equal Channel Angular Pressing [Volume 6, Issue 1, 2022, Pages 3-14]
Razfar, Mohammad Reza Investigation of Laser Induced Plasma Assisted Ablation of Glass in Presence of Magnetic Field [Volume 6, Issue 3, 2022, Pages 401-414]
Rezaei, Morteza Triply Periodic Minimal Surfaces Scaffolds and Their Comparison with Cancellous Bone: Fluid Flow Point of View [Volume 6, Issue 3, 2022, Pages 443-466]
Rezaei, s.mehdi Investigation of Laser Induced Plasma Assisted Ablation of Glass in Presence of Magnetic Field [Volume 6, Issue 3, 2022, Pages 401-414]
Rezazade, Marzie Numerical Simulation of Blood Flow in a Stented Aneurysm Using Lattice Boltzmann Method [Volume 6, Issue 2, 2022, Pages 229-248]
S
Sadr Lahijani, Mohammad Homayoun A Proposed Approach to Simulate Thin Quadrilateral Plates Using Generalized Differential Quadrature Method Based on Kirchhoff–Love Theory [Volume 6, Issue 1, 2022, Pages 15-30]
Safari, Farhad Design of Robust Proportional-(Proportional-Derivative) Controller for an Autonomous Underwater Vehicle Using Quantitative Feedback Theory in the Diving Plane [Volume 6, Issue 3, 2022, Pages 363-386]
Safavi, Seyed AlirezaA Parametric Investigation of Melting Process within a Porous Medium under Local Thermal Non-Equilibrium Condition Using Lattice Boltzmann Method [Volume 6, Issue 3, 2022, Pages 467-488]
Saidi, Maysam Numerical Evaluation on Blood Rheological Behavior in a Realistic Model of Aneurysmal Coronary Artery [Volume 6, Issue 4, 2022, Pages 579-596]
Sarfaraz Khabbaz, Roohollah Influencing Parameters on Tensile Modulus Characterization of Unidirectional Composite Laminates Using Digital Image Correlation Technique [Volume 6, Issue 4, 2022, Pages 545-560]
Shahverdi, Hossein A Proposed Approach to Simulate Thin Quadrilateral Plates Using Generalized Differential Quadrature Method Based on Kirchhoff–Love Theory [Volume 6, Issue 1, 2022, Pages 15-30]
Shakib, Seyyed Ehsan Numerical and Thermodynamic Study of a Gas Turbine Cycle with Evaporative Cooling [Volume 6, Issue 2, 2022, Pages 279-292]
Sobamowo, M. G. Evaluation of Micropolar Fluid Transport through Penetrable Medium: Effect of Flow and Thermal Slip [Volume 6, Issue 3, 2022, Pages 427-442]
Soltani, M. Impact of Canard on the Flowfield over the Wing in Various Flow Regimes [Volume 6, Issue 1, 2022, Pages 113-128]
Soltanipour, Hossein Two-Phase Simulation of Magnetohydrodynamics and Ferrohydrodynamics Impacts on the Natural Convection of a Magnetic Nanofluid within a Porous Cavity [Volume 6, Issue 1, 2022, Pages 129-148]
T
Taghilou, Mohammad A Parametric Investigation of Melting Process within a Porous Medium under Local Thermal Non-Equilibrium Condition Using Lattice Boltzmann Method [Volume 6, Issue 3, 2022, Pages 467-488]
Tanzadeh Panah, Mahboube Inverse Reconstruction of Absorption-Coefficient Distribution in a Two-Dimensional Radiative Medium from the Knowledge of Wall Heat Fluxes [Volume 6, Issue 3, 2022, Pages 415-426]
V
Vali, Ashkan Synthesis of a Six-Link Mechanism for Generating the Ankle Motion Trajectory Using Shadow Robot Control Method [Volume 6, Issue 2, 2022, Pages 189-200]
W
Wood, David . AHybrid Neural Network and Particle Swarm Optimization Model Applied to Assist Production Planning in a Large Petrochemical Plant [Volume 6, Issue 4, 2022, Pages 491-510]
Y
Yazdani, Mojtaba Experimental Study on Puncture Resistance of 2D and 3D Glass Fabrics Reinforced with Shear Thickening Fluid [Volume 6, Issue 1, 2022, Pages 31-44]
Yekani Motlagh, Saber Two-Phase Simulation of Magnetohydrodynamics and Ferrohydrodynamics Impacts on the Natural Convection of a Magnetic Nanofluid within a Porous Cavity [Volume 6, Issue 1, 2022, Pages 129-148]
Z
Zarei Aziz, Amirreza Influencing Parameters on Tensile Modulus Characterization of Unidirectional Composite Laminates Using Digital Image Correlation Technique [Volume 6, Issue 4, 2022, Pages 545-560]
