Author Index

A

  • Abbasian Arani, A.A. Energy and Exergy Analysis and Optimization of a Heat Sink Collector Equipped with Rotational Obstacles [Volume 2, Issue 1, 2018, Pages 39-50]
  • Abootorabi, M. M. Multi-objective Optimization of Surface Roughness and Material Removal Rate Using an Improved Self-Adaptive Particle Swarm Optimization Algorithm in Milling process [Volume 2, Issue 1, 2018, Pages 117-124]
  • Adelshahian, B. Modeling and Analysis of a Hybrid Photovoltaic-Thermoelectric Solar Cavity-Receiver Power Generator [Volume 2, Issue 2, 2018, Pages 277-288]
  • Afrasiab, H. A Fluid-Structure Interaction Study on Vulnerability of Different Coronary Plaques to Blood Flow Increase During Physical Exercise [Volume 2, Issue 1, 2018, Pages 51-60]
  • Afshari, H. Exact Closed-Form Solution for Vibration Analysis of Beams Carrying Lumped Masses with Rotary Inertias [Volume 2, Issue 1, 2018, Pages 73-90]
  • Aghdam, M. M. The Effect of Impact Energy Parameters on the Closed-Cell Aluminum Foam Crushing Behavior Using X-Ray Tomography Method [Volume 2, Issue 1, 2018, Pages 107-116]
  • Ahmadi, M. Estimation of Waste Heat from Exhaust Gases of an Iron Ore Pelletizing Plant in Iran [Volume 2, Issue 2, 2018, Pages 263-276]
  • Akbarzadeh, A. Surface Stress Effect on Nonlinear Instability of Imperfect Piezoelectric Nanoshells under Combination of Hydrostatic Pressure and Lateral Electric Field [Volume 2, Issue 2, 2018, Pages 177-190]
  • Ameri, M. Modeling and Analysis of a Hybrid Photovoltaic-Thermoelectric Solar Cavity-Receiver Power Generator [Volume 2, Issue 2, 2018, Pages 277-288]
  • Asgari, M. Pertinence of Sheep Knee Joint for Calibration of Ligaments’ Constitutive Equations; Experimental and Theoretical Study [Volume 2, Issue 2, 2018, Pages 165-176]

C

  • Comsa, D.-S. A Simplified Description of the Uniaxial Tensile Test Used for Calibrating Constitutive Models of Orthotropic Porous Sheet Metals [Volume 2, Issue 2, 2018, Pages 127-136]

F

  • Farhangian Marandi, O. Modeling and Analysis of a Hybrid Photovoltaic-Thermoelectric Solar Cavity-Receiver Power Generator [Volume 2, Issue 2, 2018, Pages 277-288]
  • Farsi, M. A. Fault Analysis of Complex Systems via Dynamic Bayesian Network [Volume 2, Issue 2, 2018, Pages 207-216]

G

  • Ghassabi, M. Nonlinear Free Transverse Vibration Analysis of Beams Using Variational Iteration Method [Volume 2, Issue 2, 2018, Pages 233-242]
  • Ghorbani, T. Thermodynamic Analysis and Feasibility Study of Internal Combustion Engine Waste Heat Recovery to Run its Refrigeration System [Volume 2, Issue 2, 2018, Pages 253-262]
  • Goodarzi, S. Estimation of Waste Heat from Exhaust Gases of an Iron Ore Pelletizing Plant in Iran [Volume 2, Issue 2, 2018, Pages 263-276]

H

  • Hajiaboutalebi, F. Exact Closed-Form Solution for Vibration Analysis of Beams Carrying Lumped Masses with Rotary Inertias [Volume 2, Issue 1, 2018, Pages 73-90]
  • Hemmasian Ettefagh, M. Robustness of Controlled Lagrangian Method to the Structured Uncertainties [Volume 2, Issue 1, 2018, Pages 61-72]
  • Honarpisheh, M. Residual Stresses Measurement in UIC 60 Rail by Ring-Core Method and Sectioning Technique [Volume 2, Issue 1, 2018, Pages 99-106]
  • Honarpisheh, M. Experimental and Numerical Study on the Accuracy Residual Stress Measurement by Incremental Ring-Core Method [Volume 2, Issue 2, 2018, Pages 137-148]
  • Hosseini-Toudeshky, H. Experimental Investigations of Static and Fatigue Crack Growth in Sandwich Structures with Foam Core and Fiber-Metal Laminates Face Sheets [Volume 2, Issue 2, 2018, Pages 149-164]

J

  • Jahanshahi Javaran, E. Estimation of Waste Heat from Exhaust Gases of an Iron Ore Pelletizing Plant in Iran [Volume 2, Issue 2, 2018, Pages 263-276]

K

  • Kami, A. A Simplified Description of the Uniaxial Tensile Test Used for Calibrating Constitutive Models of Orthotropic Porous Sheet Metals [Volume 2, Issue 2, 2018, Pages 127-136]
  • Kermani, S. Energy and Exergy Analysis and Optimization of a Heat Sink Collector Equipped with Rotational Obstacles [Volume 2, Issue 1, 2018, Pages 39-50]
  • Khalafi, V. Nonlinear Aerothermoelastic Analysis of Functionally Graded Rectangular Plates Subjected to Hypersonic Airflow Loadings [Volume 2, Issue 2, 2018, Pages 217-232]
  • Kosarineia, A. Thermal Analysis Circular Couette Flow of Non-Newtonian Fluid with Viscous Dissipation [Volume 2, Issue 1, 2018, Pages 3-12]

M

  • Mahmoudimehr, J. Influence of Burner Head Design on Its Thermal and Environmental Characteristics [Volume 2, Issue 1, 2018, Pages 27-38]
  • Mahzoon, M. Robustness of Controlled Lagrangian Method to the Structured Uncertainties [Volume 2, Issue 1, 2018, Pages 61-72]
  • Mazaheri, F. Experimental Investigations of Static and Fatigue Crack Growth in Sandwich Structures with Foam Core and Fiber-Metal Laminates Face Sheets [Volume 2, Issue 2, 2018, Pages 149-164]
  • Mehdipour, R. Determining a Suitable Location for Wind Turbines Using Inverse Solution and Mast Data in a Mountainous Terrain [Volume 2, Issue 2, 2018, Pages 243-252]
  • Moazam, M. A. Experimental and Numerical Study on the Accuracy Residual Stress Measurement by Incremental Ring-Core Method [Volume 2, Issue 2, 2018, Pages 137-148]
  • Moazam, M.A. Residual Stresses Measurement in UIC 60 Rail by Ring-Core Method and Sectioning Technique [Volume 2, Issue 1, 2018, Pages 99-106]
  • Mohammadi, E. Determining a Suitable Location for Wind Turbines Using Inverse Solution and Mast Data in a Mountainous Terrain [Volume 2, Issue 2, 2018, Pages 243-252]
  • Mohammadi, S. A. Nonlinear Free Vibration of Buckled Size-Dependent Functionally Graded Nanobeams Using Homotopy Perturbation Method [Volume 2, Issue 2, 2018, Pages 191-206]
  • Mohammadi Aghdam, M. Surface Stress Effect on Nonlinear Instability of Imperfect Piezoelectric Nanoshells under Combination of Hydrostatic Pressure and Lateral Electric Field [Volume 2, Issue 2, 2018, Pages 177-190]
  • Mohammadkhani, F. Thermodynamic Analysis and Feasibility Study of Internal Combustion Engine Waste Heat Recovery to Run its Refrigeration System [Volume 2, Issue 2, 2018, Pages 253-262]
  • Mohebbi, A. Nonlinear Free Transverse Vibration Analysis of Beams Using Variational Iteration Method [Volume 2, Issue 2, 2018, Pages 233-242]
  • Mousavi Kolousforoushi, S. F. Influence of Burner Head Design on Its Thermal and Environmental Characteristics [Volume 2, Issue 1, 2018, Pages 27-38]

N

  • Naraghi, M. Robustness of Controlled Lagrangian Method to the Structured Uncertainties [Volume 2, Issue 1, 2018, Pages 61-72]
  • Noori, S. Nonlinear Aerothermoelastic Analysis of Functionally Graded Rectangular Plates Subjected to Hypersonic Airflow Loadings [Volume 2, Issue 2, 2018, Pages 217-232]

R

  • Rafeeyan, M. Effect of Concentrated Axial Harmonic Force on Lateral Vibration of a Mono- Disk Rotating Shaft [Volume 2, Issue 1, 2018, Pages 91-96]
  • Rahnama, M. Simulation of Natural Convection in Eccentric Annulus: A Combined Lattice Boltzmann and Smoothed Profile Approach [Volume 2, Issue 1, 2018, Pages 13-26]
  • Rahnama, M. Estimation of Waste Heat from Exhaust Gases of an Iron Ore Pelletizing Plant in Iran [Volume 2, Issue 2, 2018, Pages 263-276]
  • Rashedi, B. Pertinence of Sheep Knee Joint for Calibration of Ligaments’ Constitutive Equations; Experimental and Theoretical Study [Volume 2, Issue 2, 2018, Pages 165-176]

S

  • Sadighi, M. The Effect of Impact Energy Parameters on the Closed-Cell Aluminum Foam Crushing Behavior Using X-Ray Tomography Method [Volume 2, Issue 1, 2018, Pages 107-116]
  • Sadripour, S. Energy and Exergy Analysis and Optimization of a Heat Sink Collector Equipped with Rotational Obstacles [Volume 2, Issue 1, 2018, Pages 39-50]
  • Sahmani, S. Surface Stress Effect on Nonlinear Instability of Imperfect Piezoelectric Nanoshells under Combination of Hydrostatic Pressure and Lateral Electric Field [Volume 2, Issue 2, 2018, Pages 177-190]
  • Shahverdi, H. Nonlinear Aerothermoelastic Analysis of Functionally Graded Rectangular Plates Subjected to Hypersonic Airflow Loadings [Volume 2, Issue 2, 2018, Pages 217-232]
  • Sharifi, D. Nonlinear Free Transverse Vibration Analysis of Beams Using Variational Iteration Method [Volume 2, Issue 2, 2018, Pages 233-242]

T

  • Talebi, S. The Effect of Impact Energy Parameters on the Closed-Cell Aluminum Foam Crushing Behavior Using X-Ray Tomography Method [Volume 2, Issue 1, 2018, Pages 107-116]
  • Torabi, K. Exact Closed-Form Solution for Vibration Analysis of Beams Carrying Lumped Masses with Rotary Inertias [Volume 2, Issue 1, 2018, Pages 73-90]
  • Torabi, K. Nonlinear Free Transverse Vibration Analysis of Beams Using Variational Iteration Method [Volume 2, Issue 2, 2018, Pages 233-242]

Y

  • Yari, M. Thermodynamic Analysis and Feasibility Study of Internal Combustion Engine Waste Heat Recovery to Run its Refrigeration System [Volume 2, Issue 2, 2018, Pages 253-262]

Z

  • ZARE, A.H. Determining a Suitable Location for Wind Turbines Using Inverse Solution and Mast Data in a Mountainous Terrain [Volume 2, Issue 2, 2018, Pages 243-252]
  • Zeinolabedini, M. R. Effect of Concentrated Axial Harmonic Force on Lateral Vibration of a Mono- Disk Rotating Shaft [Volume 2, Issue 1, 2018, Pages 91-96]
  • Ziaee, S. Nonlinear Free Vibration of Buckled Size-Dependent Functionally Graded Nanobeams Using Homotopy Perturbation Method [Volume 2, Issue 2, 2018, Pages 191-206]