AUT Journal of Mechanical Engineering

AUT Journal of Mechanical Engineering

Keyword Index
A
  • ABS Enhancing Mechanical Properties of Ultrasonically-Treated 3D-Printed AcrylonitrileButadiene-Styrene and Polylactic Acid Parts: A Full Factoria [Volume 7, Issue 3, 2023, Pages 283-296]
  • Acoustic field Simultaneous impacts of acoustic and inertial forces on the separation of microparticles [Volume 7, Issue 1, 2023, Pages 41-50]
  • Active separation Simultaneous impacts of acoustic and inertial forces on the separation of microparticles [Volume 7, Issue 1, 2023, Pages 41-50]
  • Adaptive Cruise Control A New Adaptive Cruise Control Strategy Considering Road Conditions [Volume 7, Issue 4, 2023, Pages 355-366]
  • Additive Manufacturing Enhancing Mechanical Properties of Ultrasonically-Treated 3D-Printed AcrylonitrileButadiene-Styrene and Polylactic Acid Parts: A Full Factoria [Volume 7, Issue 3, 2023, Pages 283-296]
  • Air injection Investigating the Effect of Casing Injection Parameters on Transonic Axial Compressor Performance [Volume 7, Issue 4, 2023, Pages 367-388]
  • Al The use of copper as an accelerator for the formation of titanium aluminide intermetallic compounds [Volume 7, Issue 1, 2023, Pages 51-60]
  • Ammonia concentration Exploring Flame Characteristics of CH4/CO2/Ammonia/Air Mixtures under Elevated Conditions: An Interferometry-Based Investigation [Volume 7, Issue 4, 2023, Pages 389-418]
  • Ant colony optimization Minimum Time Search Path Planning for Multiple Fixed-Wing Unmanned Aerial Vehicles with Adaptive Formation [Volume 7, Issue 3, 2023, Pages 297-316]
  • Autonomous vehicle A New Adaptive Cruise Control Strategy Considering Road Conditions [Volume 7, Issue 4, 2023, Pages 355-366]
  • Axial compressor Investigating the Effect of Casing Injection Parameters on Transonic Axial Compressor Performance [Volume 7, Issue 4, 2023, Pages 367-388]
B
  • Back-stepping control Investigation on performance improvement of a fully-actuated quadrotor [Volume 7, Issue 1, 2023, Pages 19-40]
  • Biogas A modified biogas-driven combined cooling and power system based on open and close Brayton cycles [Volume 7, Issue 2, 2023, Pages 91-116]
  • Boungiorno model Ferrofluid Injection and Applied Magnetic Field Influences on the Characteristics of Flow Over a Cylinder [Volume 7, Issue 2, 2023, Pages 131-154]
  • Break-up Modeling the droplet break-up based on drawing the shape using velocity gradient and normal vector [Volume 7, Issue 3, 2023, Pages 261-282]
C
  • CFD Numerical Investigation Of The Best Wind Turbine Shroud Flange Curvature For Maximum Wind Power Extraction [Volume 7, Issue 2, 2023, Pages 185-198]
  • Cogeneration A modified biogas-driven combined cooling and power system based on open and close Brayton cycles [Volume 7, Issue 2, 2023, Pages 91-116]
  • Coherent structure Large Eddy Simulation and Proper Orthogonal Decomposition Analysis of Two-phase Turbulent Thermomagnetic Convection of a Ferrofluid in a Cubic Cavity [Volume 7, Issue 2, 2023, Pages 155-174]
  • Computational fluid dynamics (CFD) Multi-Domain Modeling Platform for Electrical-Signature-Based Condition Monitoring of Motor-Driven Pumps [Volume 7, Issue 1, 2023, Pages 73-88]
  • Copper The use of copper as an accelerator for the formation of titanium aluminide intermetallic compounds [Volume 7, Issue 1, 2023, Pages 51-60]
  • Critical heat flux An investigation of pool boiling under alternating magnetic field and steady-state conditions [Volume 7, Issue 1, 2023, Pages 3-18]
D
  • Double pass SAH A New and Efficient Design of Double Pass Solar Air Heater [Volume 7, Issue 4, 2023, Pages 339-354]
  • Driving pressure potential Mathematical study on performance enhancement of solar updraft tower power plant by hot gas injection from an external source [Volume 7, Issue 3, 2023, Pages 241-260]
  • Dual-Pressure Organic Rankine Cycle (DPORC) Thermodynamic and Environmental Analysis of a Dual-Pressure Organic Rankine Cycle for Waste Heat Recovery from a Turbocharged Diesel Engine Fueled with Ethanol and Methanol Blends [Volume 7, Issue 3, 2023, Pages 217-240]
  • Dubins curve Minimum Time Search Path Planning for Multiple Fixed-Wing Unmanned Aerial Vehicles with Adaptive Formation [Volume 7, Issue 3, 2023, Pages 297-316]
  • Dynamic Control A New Adaptive Cruise Control Strategy Considering Road Conditions [Volume 7, Issue 4, 2023, Pages 355-366]
E
  • Economic analysis A modified biogas-driven combined cooling and power system based on open and close Brayton cycles [Volume 7, Issue 2, 2023, Pages 91-116]
  • Electrical signature analysis (ESA) Multi-Domain Modeling Platform for Electrical-Signature-Based Condition Monitoring of Motor-Driven Pumps [Volume 7, Issue 1, 2023, Pages 73-88]
  • Elevated conditions Exploring Flame Characteristics of CH4/CO2/Ammonia/Air Mixtures under Elevated Conditions: An Interferometry-Based Investigation [Volume 7, Issue 4, 2023, Pages 389-418]
  • Entropy generation Ferrofluid Injection and Applied Magnetic Field Influences on the Characteristics of Flow Over a Cylinder [Volume 7, Issue 2, 2023, Pages 131-154]
  • Ethanol Thermodynamic and Environmental Analysis of a Dual-Pressure Organic Rankine Cycle for Waste Heat Recovery from a Turbocharged Diesel Engine Fueled with Ethanol and Methanol Blends [Volume 7, Issue 3, 2023, Pages 217-240]
F
  • Feature Extraction Machine Vision System for Autonomous Guidance of Raisin-Collection Rover [Volume 7, Issue 1, 2023, Pages 61-72]
  • Ferrohydrodynamics (FHD) Ferrofluid Injection and Applied Magnetic Field Influences on the Characteristics of Flow Over a Cylinder [Volume 7, Issue 2, 2023, Pages 131-154]
  • Flange Numerical Investigation Of The Best Wind Turbine Shroud Flange Curvature For Maximum Wind Power Extraction [Volume 7, Issue 2, 2023, Pages 185-198]
  • Flow Control Ferrofluid Injection and Applied Magnetic Field Influences on the Characteristics of Flow Over a Cylinder [Volume 7, Issue 2, 2023, Pages 131-154]
  • Force measurement Experimental and Numerical Study of a Supercritical Wing Performance at Low Reynolds Numbers Equipped with Different Winglet Planforms [Volume 7, Issue 3, 2023, Pages 201-216]
  • Fully-actuated quadrotor Investigation on performance improvement of a fully-actuated quadrotor [Volume 7, Issue 1, 2023, Pages 19-40]
G
  • Gas path Analysis (GPA) The Effect of Turbine Blade Erosion on the Gas Path Measurements and Performance of Micro Gas Turbines [Volume 7, Issue 4, 2023, Pages 419-438]
H
  • Hot gas injection Mathematical study on performance enhancement of solar updraft tower power plant by hot gas injection from an external source [Volume 7, Issue 3, 2023, Pages 241-260]
I
  • Image processing Machine Vision System for Autonomous Guidance of Raisin-Collection Rover [Volume 7, Issue 1, 2023, Pages 61-72]
K
  • Kinetic model Exploring Flame Characteristics of CH4/CO2/Ammonia/Air Mixtures under Elevated Conditions: An Interferometry-Based Investigation [Volume 7, Issue 4, 2023, Pages 389-418]
L
  • Laminar burning velocity Exploring Flame Characteristics of CH4/CO2/Ammonia/Air Mixtures under Elevated Conditions: An Interferometry-Based Investigation [Volume 7, Issue 4, 2023, Pages 389-418]
  • Landfill gas (LFG) Exploring Flame Characteristics of CH4/CO2/Ammonia/Air Mixtures under Elevated Conditions: An Interferometry-Based Investigation [Volume 7, Issue 4, 2023, Pages 389-418]
  • LAP JOINT Finite element modeling of heat transfer in pulsed laser welding of similar and dissimilar carbon and stainless steels [Volume 7, Issue 2, 2023, Pages 117-130]
  • Longitudinal motion A New Adaptive Cruise Control Strategy Considering Road Conditions [Volume 7, Issue 4, 2023, Pages 355-366]
  • Lorentz force An investigation of pool boiling under alternating magnetic field and steady-state conditions [Volume 7, Issue 1, 2023, Pages 3-18]
M
  • Methanol Thermodynamic and Environmental Analysis of a Dual-Pressure Organic Rankine Cycle for Waste Heat Recovery from a Turbocharged Diesel Engine Fueled with Ethanol and Methanol Blends [Volume 7, Issue 3, 2023, Pages 217-240]
  • Microfluidics Simultaneous impacts of acoustic and inertial forces on the separation of microparticles [Volume 7, Issue 1, 2023, Pages 41-50]
  • Micro Gas Turbine (MGT) The Effect of Turbine Blade Erosion on the Gas Path Measurements and Performance of Micro Gas Turbines [Volume 7, Issue 4, 2023, Pages 419-438]
  • Modified Bond-Based Perforation study of steel sheet under high velocity impact using Peridynamic theory [Volume 7, Issue 2, 2023, Pages 175-184]
N
  • NACA 641412 Experimental and Numerical Study of a Supercritical Wing Performance at Low Reynolds Numbers Equipped with Different Winglet Planforms [Volume 7, Issue 3, 2023, Pages 201-216]
  • Non-uniform fin distribution Effects of fin arrangement on the melting process in a vertical ‎double-tube heat exchanger considering intermittent ‎boundary conditions [Volume 7, Issue 4, 2023, Pages 319-338]
O
  • One-Dimensional Model Thermodynamic and Environmental Analysis of a Dual-Pressure Organic Rankine Cycle for Waste Heat Recovery from a Turbocharged Diesel Engine Fueled with Ethanol and Methanol Blends [Volume 7, Issue 3, 2023, Pages 217-240]
P
  • Passive separation Simultaneous impacts of acoustic and inertial forces on the separation of microparticles [Volume 7, Issue 1, 2023, Pages 41-50]
  • Penetration depth Finite element modeling of heat transfer in pulsed laser welding of similar and dissimilar carbon and stainless steels [Volume 7, Issue 2, 2023, Pages 117-130]
  • Performance Deterioration The Effect of Turbine Blade Erosion on the Gas Path Measurements and Performance of Micro Gas Turbines [Volume 7, Issue 4, 2023, Pages 419-438]
  • Peridynamic Theory Perforation study of steel sheet under high velocity impact using Peridynamic theory [Volume 7, Issue 2, 2023, Pages 175-184]
  • Phase change material Effects of fin arrangement on the melting process in a vertical ‎double-tube heat exchanger considering intermittent ‎boundary conditions [Volume 7, Issue 4, 2023, Pages 319-338]
  • PLA Enhancing Mechanical Properties of Ultrasonically-Treated 3D-Printed AcrylonitrileButadiene-Styrene and Polylactic Acid Parts: A Full Factoria [Volume 7, Issue 3, 2023, Pages 283-296]
  • Pool boiling An investigation of pool boiling under alternating magnetic field and steady-state conditions [Volume 7, Issue 1, 2023, Pages 3-18]
  • Powder metallurgy The use of copper as an accelerator for the formation of titanium aluminide intermetallic compounds [Volume 7, Issue 1, 2023, Pages 51-60]
  • Predictive maintenance The Effect of Turbine Blade Erosion on the Gas Path Measurements and Performance of Micro Gas Turbines [Volume 7, Issue 4, 2023, Pages 419-438]
  • Proper Orthogonal Decomposition Large Eddy Simulation and Proper Orthogonal Decomposition Analysis of Two-phase Turbulent Thermomagnetic Convection of a Ferrofluid in a Cubic Cavity [Volume 7, Issue 2, 2023, Pages 155-174]
  • Proportional-Derivative controller Investigation on performance improvement of a fully-actuated quadrotor [Volume 7, Issue 1, 2023, Pages 19-40]
  • Pulse energy Finite element modeling of heat transfer in pulsed laser welding of similar and dissimilar carbon and stainless steels [Volume 7, Issue 2, 2023, Pages 117-130]
  • Pulse frequency Finite element modeling of heat transfer in pulsed laser welding of similar and dissimilar carbon and stainless steels [Volume 7, Issue 2, 2023, Pages 117-130]
Q
  • Quadrotor Investigation on performance improvement of a fully-actuated quadrotor [Volume 7, Issue 1, 2023, Pages 19-40]
R
  • Reconfiguration Minimum Time Search Path Planning for Multiple Fixed-Wing Unmanned Aerial Vehicles with Adaptive Formation [Volume 7, Issue 3, 2023, Pages 297-316]
S
  • Search and rescue Minimum Time Search Path Planning for Multiple Fixed-Wing Unmanned Aerial Vehicles with Adaptive Formation [Volume 7, Issue 3, 2023, Pages 297-316]
  • Shroud Numerical Investigation Of The Best Wind Turbine Shroud Flange Curvature For Maximum Wind Power Extraction [Volume 7, Issue 2, 2023, Pages 185-198]
  • Simulation Finite element modeling of heat transfer in pulsed laser welding of similar and dissimilar carbon and stainless steels [Volume 7, Issue 2, 2023, Pages 117-130]
  • Solar updraft tower power plant Mathematical study on performance enhancement of solar updraft tower power plant by hot gas injection from an external source [Volume 7, Issue 3, 2023, Pages 241-260]
T
  • Theoretical model Mathematical study on performance enhancement of solar updraft tower power plant by hot gas injection from an external source [Volume 7, Issue 3, 2023, Pages 241-260]
  • Thermodynamic analysis A modified biogas-driven combined cooling and power system based on open and close Brayton cycles [Volume 7, Issue 2, 2023, Pages 91-116]
  • TiO2 The use of copper as an accelerator for the formation of titanium aluminide intermetallic compounds [Volume 7, Issue 1, 2023, Pages 51-60]
  • Tip leakage flow Investigating the Effect of Casing Injection Parameters on Transonic Axial Compressor Performance [Volume 7, Issue 4, 2023, Pages 367-388]
  • Titanium aluminide The use of copper as an accelerator for the formation of titanium aluminide intermetallic compounds [Volume 7, Issue 1, 2023, Pages 51-60]
  • Turbine Erosion The Effect of Turbine Blade Erosion on the Gas Path Measurements and Performance of Micro Gas Turbines [Volume 7, Issue 4, 2023, Pages 419-438]
  • Turbocharged Diesel engine Thermodynamic and Environmental Analysis of a Dual-Pressure Organic Rankine Cycle for Waste Heat Recovery from a Turbocharged Diesel Engine Fueled with Ethanol and Methanol Blends [Volume 7, Issue 3, 2023, Pages 217-240]
U
  • Ultrasonic Treatment Enhancing Mechanical Properties of Ultrasonically-Treated 3D-Printed AcrylonitrileButadiene-Styrene and Polylactic Acid Parts: A Full Factoria [Volume 7, Issue 3, 2023, Pages 283-296]
  • Underactuated quadrotor Investigation on performance improvement of a fully-actuated quadrotor [Volume 7, Issue 1, 2023, Pages 19-40]
  • Unmanned Aerial Vehicle Minimum Time Search Path Planning for Multiple Fixed-Wing Unmanned Aerial Vehicles with Adaptive Formation [Volume 7, Issue 3, 2023, Pages 297-316]
V
  • Vertical double-tube heat exchanger Effects of fin arrangement on the melting process in a vertical ‎double-tube heat exchanger considering intermittent ‎boundary conditions [Volume 7, Issue 4, 2023, Pages 319-338]
W
  • Wind Mathematical study on performance enhancement of solar updraft tower power plant by hot gas injection from an external source [Volume 7, Issue 3, 2023, Pages 241-260]
  • Wind-Tunnel Testing Experimental and Numerical Study of a Supercritical Wing Performance at Low Reynolds Numbers Equipped with Different Winglet Planforms [Volume 7, Issue 3, 2023, Pages 201-216]
  • Wind turbine Numerical Investigation Of The Best Wind Turbine Shroud Flange Curvature For Maximum Wind Power Extraction [Volume 7, Issue 2, 2023, Pages 185-198]
  • Winglet Experimental and Numerical Study of a Supercritical Wing Performance at Low Reynolds Numbers Equipped with Different Winglet Planforms [Volume 7, Issue 3, 2023, Pages 201-216]