Author Index

A

  • Afshari, H. A Parametric Study on Flutter Analysis of Cantilevered Trapezoidal FG Sandwich Plates [Volume 1, Issue 2, 2017, Pages 191-210]
  • Ahmadi, G. Numerical Investigation of Nano Particles Dispersion and Deposition in Fully Developed Laminar Pipe Flows [Volume 1, Issue 1, 2017, Pages 13-20]
  • Ahmadi Khatir, F. Investigation of Die Clearance in Rubber Pad Forming of Metallic Bipolar Plates [Volume 1, Issue 1, 2017, Pages 89-98]
  • Alavi, S. M. A. Investigation of Effective Parameters on a Thermal Load in a Thermo-Acoustic Refrigerator [Volume 1, Issue 1, 2017, Pages 49-54]
  • Amiri Jahed, Sh. An Investigation of the Effects of Crack on the Zone of Pull-in Suppression in MicroElectromechanical Systems Using High-Frequency Excitation [Volume 1, Issue 1, 2017, Pages 99-108]
  • Amjadian, P. A Unified Velocity Field for Analysis of Flat Rolling Process [Volume 1, Issue 2, 2017, Pages 139-148]
  • Ansarian, H. Computational Investigation of Unsteady Compressible Flow over a Fixed Delta Wing Using Detached Eddy Simulation [Volume 1, Issue 2, 2017, Pages 219-232]
  • Atf, A. Numerical Analysis of Critical Heat Flux Phenomenon in a Nuclear Power Plant Core Channel in the Presence of Mixing Vanes [Volume 1, Issue 2, 2017, Pages 119-130]

B

  • Babaei, A. A Geometric Modeling Approach to Find the Best Microstructure for Infiltrated SOFC Electrodes [Volume 1, Issue 1, 2017, Pages 55-66]
  • Baniassadi, M. A Geometric Modeling Approach to Find the Best Microstructure for Infiltrated SOFC Electrodes [Volume 1, Issue 1, 2017, Pages 55-66]
  • Bashiri, S. Experimental Study of Subcooled Pool Boiling around a Circular Rough Cylinder [Volume 1, Issue 1, 2017, Pages 21-28]
  • Bazvandi, H. Improving the Transient Thermal Fatigue Life of a Gas Turbine Casing by Drilling Stop Holes and Inserting Pins into Them [Volume 1, Issue 1, 2017, Pages 67-74]
  • Brown, R. Numerical Investigation of Nano Particles Dispersion and Deposition in Fully Developed Laminar Pipe Flows [Volume 1, Issue 1, 2017, Pages 13-20]

D

  • Dashtbayazi, M. R. On the Elastic Field of Al/SiC Nanocomposite [Volume 1, Issue 2, 2017, Pages 149-158]

E

  • Eipakchi, H. R. An Analytical Procedure for Buckling Load Determination of an Axisymmetric Cylinder with Non-Uniform Thickness Using Shear Deformation Theory [Volume 1, Issue 2, 2017, Pages 211-218]
  • Elyasi, M. Investigation of Die Clearance in Rubber Pad Forming of Metallic Bipolar Plates [Volume 1, Issue 1, 2017, Pages 89-98]

G

  • Gaffari, A. Modeling Behavior of a Chain of Protein as a Bionanorobot by Changing Environmental Condition [Volume 1, Issue 1, 2017, Pages 109-116]
  • Ghannadpour, S. A. M. A New Method to Investigate the Progressive Damage of Imperfect Composite Plates Under In-Plane Compressive Load [Volume 1, Issue 2, 2017, Pages 159-168]
  • Goodarzi, M. Comparative Analysis on Thermal Performance of Different Natural-draft Dry Cooling Towers under Crosswind Condition [Volume 1, Issue 1, 2017, Pages 39-48]

H

  • Hadidoolabi, M. Computational Investigation of Unsteady Compressible Flow over a Fixed Delta Wing Using Detached Eddy Simulation [Volume 1, Issue 2, 2017, Pages 219-232]
  • Haghighat, H. A Unified Velocity Field for Analysis of Flat Rolling Process [Volume 1, Issue 2, 2017, Pages 139-148]
  • Hashemi, Z. Dynamic Response of a Red Blood Cell in Shear Flow [Volume 1, Issue 2, 2017, Pages 233-242]
  • Hassannejad, R. An Investigation of the Effects of Crack on the Zone of Pull-in Suppression in MicroElectromechanical Systems Using High-Frequency Excitation [Volume 1, Issue 1, 2017, Pages 99-108]
  • Heidarinejad, Gh. Numerical Analysis of In-Cylinder Flow in Internal Combustion Engines by LES Method [Volume 1, Issue 1, 2017, Pages 29-38]
  • Hirbodi, K. Experimental Study of Subcooled Pool Boiling around a Circular Rough Cylinder [Volume 1, Issue 1, 2017, Pages 21-28]
  • Hosseinzadeh, M. Investigation of Die Clearance in Rubber Pad Forming of Metallic Bipolar Plates [Volume 1, Issue 1, 2017, Pages 89-98]

I

  • Inthavong, K. Numerical Investigation of Nano Particles Dispersion and Deposition in Fully Developed Laminar Pipe Flows [Volume 1, Issue 1, 2017, Pages 13-20]

J

  • Javanbakht, M. Phase Field Method to the Interaction of Phase Transformations and Dislocations at Nanoscale [Volume 1, Issue 2, 2017, Pages 243-246]

K

  • Kamarian, S. Natural Frequency Analysis of Composite Skew Plates with Embedded Shape Memory Alloys in Thermal Environment [Volume 1, Issue 2, 2017, Pages 179-190]
  • Khaleghi, H. Numerical Analysis of In-Cylinder Flow in Internal Combustion Engines by LES Method [Volume 1, Issue 1, 2017, Pages 29-38]
  • Khodayari, A. Modeling Behavior of a Chain of Protein as a Bionanorobot by Changing Environmental Condition [Volume 1, Issue 1, 2017, Pages 109-116]
  • Khorramdel, M. Numerical Analysis of In-Cylinder Flow in Internal Combustion Engines by LES Method [Volume 1, Issue 1, 2017, Pages 29-38]

L

  • Levitas, V. I. Phase Field Method to the Interaction of Phase Transformations and Dislocations at Nanoscale [Volume 1, Issue 2, 2017, Pages 243-246]

M

  • Mahboubi Nasrekani, F. An Analytical Procedure for Buckling Load Determination of an Axisymmetric Cylinder with Non-Uniform Thickness Using Shear Deformation Theory [Volume 1, Issue 2, 2017, Pages 211-218]
  • Mirzaei, M. Analysis and Optimization of Mining Truck Operation Based on the Driver Whole Body Vibration [Volume 1, Issue 2, 2017, Pages 169-178]
  • Mirzaei Nasirabad, Ho. Analysis and Optimization of Mining Truck Operation Based on the Driver Whole Body Vibration [Volume 1, Issue 2, 2017, Pages 169-178]
  • Mohammadi, A. Investigation of Effective Parameters on a Thermal Load in a Thermo-Acoustic Refrigerator [Volume 1, Issue 1, 2017, Pages 49-54]
  • Mohammadi, P. Comparative Analysis on Thermal Performance of Different Natural-draft Dry Cooling Towers under Crosswind Condition [Volume 1, Issue 1, 2017, Pages 39-48]
  • Moradi, L. Numerical Analysis of Critical Heat Flux Phenomenon in a Nuclear Power Plant Core Channel in the Presence of Mixing Vanes [Volume 1, Issue 2, 2017, Pages 119-130]
  • Movasagh, Sh. Modeling Behavior of a Chain of Protein as a Bionanorobot by Changing Environmental Condition [Volume 1, Issue 1, 2017, Pages 109-116]

N

  • Nematollahi, M. R. Experimental Study of Subcooled Pool Boiling around a Circular Rough Cylinder [Volume 1, Issue 1, 2017, Pages 21-28]
  • Nikbakht, A. Effect of Viscoelastic Interfaces on Thermo-Mechanical Behavior of a Layered Functionally Graded Spherical Vessel [Volume 1, Issue 1, 2017, Pages 75-88]
  • Norouzi, M. An Exact Analytical Solution for Convective Heat Transfer in Elliptical Pipes [Volume 1, Issue 2, 2017, Pages 131-138]

P

  • Pourhashemi, H. On the Elastic Field of Al/SiC Nanocomposite [Volume 1, Issue 2, 2017, Pages 149-158]
  • Poursaeidi, E. Improving the Transient Thermal Fatigue Life of a Gas Turbine Casing by Drilling Stop Holes and Inserting Pins into Them [Volume 1, Issue 1, 2017, Pages 67-74]

R

  • Rabiee, A. Numerical Analysis of Critical Heat Flux Phenomenon in a Nuclear Power Plant Core Channel in the Presence of Mixing Vanes [Volume 1, Issue 2, 2017, Pages 119-130]
  • Rahimdel, M. J. Analysis and Optimization of Mining Truck Operation Based on the Driver Whole Body Vibration [Volume 1, Issue 2, 2017, Pages 169-178]
  • Rahimzadeh, H. Numerical Investigation of Nano Particles Dispersion and Deposition in Fully Developed Laminar Pipe Flows [Volume 1, Issue 1, 2017, Pages 13-20]
  • Rahnama, M. Dynamic Response of a Red Blood Cell in Shear Flow [Volume 1, Issue 2, 2017, Pages 233-242]
  • Reshadi, M. Investigation of Mixed Electro-Osmotic/Poiseuille Slip Flows of Viscoelastic Fluids in Rectangular Microchannels with Hydrophobic Surfaces [Volume 1, Issue 1, 2017, Pages 3-12]

S

  • Saberi, M. H. Numerical Analysis of In-Cylinder Flow in Internal Combustion Engines by LES Method [Volume 1, Issue 1, 2017, Pages 29-38]
  • Sadighi, M. Effect of Viscoelastic Interfaces on Thermo-Mechanical Behavior of a Layered Functionally Graded Spherical Vessel [Volume 1, Issue 1, 2017, Pages 75-88]
  • Saidi, M. H. Investigation of Mixed Electro-Osmotic/Poiseuille Slip Flows of Viscoelastic Fluids in Rectangular Microchannels with Hydrophobic Surfaces [Volume 1, Issue 1, 2017, Pages 3-12]
  • Sattarvand, J. Analysis and Optimization of Mining Truck Operation Based on the Driver Whole Body Vibration [Volume 1, Issue 2, 2017, Pages 169-178]
  • Sedaghat, M. H. An Exact Analytical Solution for Convective Heat Transfer in Elliptical Pipes [Volume 1, Issue 2, 2017, Pages 131-138]
  • Shahmardan, M. M. An Exact Analytical Solution for Convective Heat Transfer in Elliptical Pipes [Volume 1, Issue 2, 2017, Pages 131-138]
  • Shakeri, M. A Geometric Modeling Approach to Find the Best Microstructure for Infiltrated SOFC Electrodes [Volume 1, Issue 1, 2017, Pages 55-66]
  • Shakeri, M. A New Method to Investigate the Progressive Damage of Imperfect Composite Plates Under In-Plane Compressive Load [Volume 1, Issue 2, 2017, Pages 159-168]
  • Shakeri, M. Natural Frequency Analysis of Composite Skew Plates with Embedded Shape Memory Alloys in Thermal Environment [Volume 1, Issue 2, 2017, Pages 179-190]

T

  • Tafazoli, M. A Geometric Modeling Approach to Find the Best Microstructure for Infiltrated SOFC Electrodes [Volume 1, Issue 1, 2017, Pages 55-66]
  • Talebizadeh, P. Numerical Investigation of Nano Particles Dispersion and Deposition in Fully Developed Laminar Pipe Flows [Volume 1, Issue 1, 2017, Pages 13-20]
  • Talezadehlari, A. Effect of Viscoelastic Interfaces on Thermo-Mechanical Behavior of a Layered Functionally Graded Spherical Vessel [Volume 1, Issue 1, 2017, Pages 75-88]
  • Torabi, K. A Parametric Study on Flutter Analysis of Cantilevered Trapezoidal FG Sandwich Plates [Volume 1, Issue 2, 2017, Pages 191-210]

Y

  • Yademellat, H. Effect of Viscoelastic Interfaces on Thermo-Mechanical Behavior of a Layered Functionally Graded Spherical Vessel [Volume 1, Issue 1, 2017, Pages 75-88]
  • Yaghoubi, M. Experimental Study of Subcooled Pool Boiling around a Circular Rough Cylinder [Volume 1, Issue 1, 2017, Pages 21-28]