Abdolzadeh, Morteza Experimental Investigation of Enhanced Shroud Flange Designs for Improved Urban Wind Turbine Performance in Low-Wind Conditions [Volume 10, Issue 3, 2026, Pages 297-318]
Ahmadi, Habib Nonlinear free oscillation of imperfect FG porous stiffened open conical panels resting on an elastic foundation under thermal conditions [Volume 10, Issue 3, 2026, Pages 389-416]
A.Khalaji, Ali Modeling & Analysis of Environmental Orbit Perturbation and Budgeting Their Effect on Orbital Elements [Volume 10, Issue 1, 2026, Pages 3-28]
Alavi Nezhad Khalil Abad, Seyed Vahid Copper’s Influence on Reactions in the Fe–Al Equimolar System: Microstructure and Phase Development [Volume 10, Issue 2, 2026, Pages 243-252]
Ambhore, Nitin Toward Sustainable Machining: A Comprehensive Review of Surface Modification Techniques for Cutting Tools [Volume 10, Issue 2, 2026, Pages 139-152]
Ambhore, Nitin Recent Developments in Carbon based and Graphene based Thermal Interface Materials: A Review [Volume 10, Issue 3, 2026, Pages 255-268]
Asif, Muhammad Experimental And Numerical Analysis of Strain Rate Dependent Mechanical Behaviour of Fused Deposition Modelling (FDM) Printed Parts [Volume 10, Issue 3, 2026, Pages 319-336]
Ayati, Moosa Balance Control Ability Evaluation & Center of Pressure (COP) Classification with Machine Learning Methods [Volume 10, Issue 2, 2026, Pages 231-242]
Azadani, Leila NImpact of Angle of Attack and Relative width of V-Shaped Ribs on the Thermo-Hydraulic Performance of a Solar Air Heater [Volume 10, Issue 2, 2026, Pages 199-210]
B
Bak-khoshnevis, Abdolamir Experimental Investigation of Enhanced Shroud Flange Designs for Improved Urban Wind Turbine Performance in Low-Wind Conditions [Volume 10, Issue 3, 2026, Pages 297-318]
Balali, Mostafa Investigation of Effective Parameters in Elliptical Spiral Equal-Channel Angular Extrusion Utilizing the Taguchi Process for Optimal Design [Volume 10, Issue 3, 2026, Pages 337-352]
Barati, Vahid Enhancing Thermo-Electrical Performance of Solid Oxide Fuel Cells through Multi-Channel Cooling System Analysis [Volume 10, Issue 2, 2026, Pages 179-198]
Behzad, Mehdi Predicting the Deterioration Trend of Rolling Element Bearings through an Adaptive Relevance Vector Machine Utilizing Limited Historical Data [Volume 10, Issue 1, 2026, Pages 43-60]
D
Dabiryan, Hadi Nonlinear Free Vibration Optimization of 2D Tri-axial Braided Composite Fan Blade via ANN, Analytical, FEM, and GA Combined Approach [Volume 10, Issue 3, 2026, Pages 353-378]
Dehkordi, Farnaz Fatigue Diagnosis Utilizing the Support Vector Machine Classification of Wrist Electromyography Signals with Feature Selection [Volume 10, Issue 1, 2026, Pages 107-122]
Dhumal, Amol RadhakisanRecent Developments in Carbon based and Graphene based Thermal Interface Materials: A Review [Volume 10, Issue 3, 2026, Pages 255-268]
Dolati, Mahdi Towards Reliable Deep Reinforcement Learning for Industrial Applications: A DDPG-based Algorithm with Improved Performance [Volume 10, Issue 1, 2026, Pages 61-74]
E
Eslamdoust, Vahid Nonlinear free oscillation of imperfect FG porous stiffened open conical panels resting on an elastic foundation under thermal conditions [Volume 10, Issue 3, 2026, Pages 389-416]
F
Fakhrabadi, Ahmad Reza Copper’s Influence on Reactions in the Fe–Al Equimolar System: Microstructure and Phase Development [Volume 10, Issue 2, 2026, Pages 243-252]
Fanaee, Seyed Abouzar The novel analytical model of low-temperature hydrogen/oxygen reactor on platinum catalytic surface in different micro-porous mediums [Volume 10, Issue 3, 2026, Pages 269-296]
Farhangdoost, Khalil A review of the various effects of a vacuum environment on the fatigue behavior of metals [Volume 10, Issue 1, 2026, Pages 89-106]
Feizi, Omid Balance Control Ability Evaluation & Center of Pressure (COP) Classification with Machine Learning Methods [Volume 10, Issue 2, 2026, Pages 231-242]
G
Ghasemi, Hananeh Impact of Angle of Attack and Relative width of V-Shaped Ribs on the Thermo-Hydraulic Performance of a Solar Air Heater [Volume 10, Issue 2, 2026, Pages 199-210]
Ghodmare, Sugesh Design of an Artificial Intelligence Based Autonomous Navigation System Using Swarm Intelligence Techniques for Agricultural Applications [Volume 10, Issue 1, 2026, Pages 123-136]
Goodarzi, Sepehr Torsional Vibration Reduction of a Rotor by Using Nonlinear Dual Dynamic Vibration Absorber [Volume 10, Issue 1, 2026, Pages 75-88]
Gurajala, Naveen KumarToward Sustainable Machining: A Comprehensive Review of Surface Modification Techniques for Cutting Tools [Volume 10, Issue 2, 2026, Pages 139-152]
H
Hossain, Md. Nayem Transient Natural Convection and Entropy Generation Analysis in a Stratified Square Enclosure [Volume 10, Issue 2, 2026, Pages 153-166]
J
Jahangirian, Alireza Experimental Study on Stall Cell Formation in High-Wing Commercial Jet under Take-Off Conditions [Volume 10, Issue 2, 2026, Pages 167-178]
Jajulwar, Kapil Design of an Artificial Intelligence Based Autonomous Navigation System Using Swarm Intelligence Techniques for Agricultural Applications [Volume 10, Issue 1, 2026, Pages 123-136]
Jattewar, Poonam Design of an Artificial Intelligence Based Autonomous Navigation System Using Swarm Intelligence Techniques for Agricultural Applications [Volume 10, Issue 1, 2026, Pages 123-136]
K
Kakade, Sandeep Experimental analysis of milled groove conformal cooling in injection molding [Volume 10, Issue 3, 2026, Pages 379-388]
Kazemi, Mostafa Experimental Study on Stall Cell Formation in High-Wing Commercial Jet under Take-Off Conditions [Volume 10, Issue 2, 2026, Pages 167-178]
Khoshhal, Razieh Copper’s Influence on Reactions in the Fe–Al Equimolar System: Microstructure and Phase Development [Volume 10, Issue 2, 2026, Pages 243-252]
Khursheed, Zeeshan Experimental And Numerical Analysis of Strain Rate Dependent Mechanical Behaviour of Fused Deposition Modelling (FDM) Printed Parts [Volume 10, Issue 3, 2026, Pages 319-336]
Kulkarni, Atul Recent Developments in Carbon based and Graphene based Thermal Interface Materials: A Review [Volume 10, Issue 3, 2026, Pages 255-268]
M
Mahmood, Zulqarnain Mukhtar Experimental And Numerical Analysis of Strain Rate Dependent Mechanical Behaviour of Fused Deposition Modelling (FDM) Printed Parts [Volume 10, Issue 3, 2026, Pages 319-336]
Malekzadeh, Maryam Hybrid Nonlinear Model Predictive Control of a Flexible Satellite [Volume 10, Issue 2, 2026, Pages 211-230]
Malik, Hamza Experimental And Numerical Analysis of Strain Rate Dependent Mechanical Behaviour of Fused Deposition Modelling (FDM) Printed Parts [Volume 10, Issue 3, 2026, Pages 319-336]
Malwad, Dnyaneshwar SExperimental analysis of milled groove conformal cooling in injection molding [Volume 10, Issue 3, 2026, Pages 379-388]
Mani, Mahmoud Experimental Study on Stall Cell Formation in High-Wing Commercial Jet under Take-Off Conditions [Volume 10, Issue 2, 2026, Pages 167-178]
Manikanta, Javvadi EswaraToward Sustainable Machining: A Comprehensive Review of Surface Modification Techniques for Cutting Tools [Volume 10, Issue 2, 2026, Pages 139-152]
Mohamadi Moghadam, Majid Fatigue Diagnosis Utilizing the Support Vector Machine Classification of Wrist Electromyography Signals with Feature Selection [Volume 10, Issue 1, 2026, Pages 107-122]
Mohammadi, Somaye Predicting the Deterioration Trend of Rolling Element Bearings through an Adaptive Relevance Vector Machine Utilizing Limited Historical Data [Volume 10, Issue 1, 2026, Pages 43-60]
Mortazavi, Mahdi Hybrid Nonlinear Model Predictive Control of a Flexible Satellite [Volume 10, Issue 2, 2026, Pages 211-230]
Murthy, Birudugadda KrishnaToward Sustainable Machining: A Comprehensive Review of Surface Modification Techniques for Cutting Tools [Volume 10, Issue 2, 2026, Pages 139-152]
N
Niknahad, Ali Experimental Investigation of Enhanced Shroud Flange Designs for Improved Urban Wind Turbine Performance in Low-Wind Conditions [Volume 10, Issue 3, 2026, Pages 297-318]
O
Ovaysi, Elham Experimental and Numerical Analysis of Electromagnetic Energy Harvester Based on a Vertical Magnetic Cantilever Beam [Volume 10, Issue 1, 2026, Pages 29-42]
Ovesy, Hamid Reza Nonlinear Free Vibration Optimization of 2D Tri-axial Braided Composite Fan Blade via ANN, Analytical, FEM, and GA Combined Approach [Volume 10, Issue 3, 2026, Pages 353-378]
Oveysisarabi, Ali Experimental and Numerical Analysis of Electromagnetic Energy Harvester Based on a Vertical Magnetic Cantilever Beam [Volume 10, Issue 1, 2026, Pages 29-42]
P
Prasad, Chitrada Toward Sustainable Machining: A Comprehensive Review of Surface Modification Techniques for Cutting Tools [Volume 10, Issue 2, 2026, Pages 139-152]
R
Rabiei, Saeid A review of the various effects of a vacuum environment on the fatigue behavior of metals [Volume 10, Issue 1, 2026, Pages 89-106]
Rahaman, Md. Mahafujur Transient Natural Convection and Entropy Generation Analysis in a Stratified Square Enclosure [Volume 10, Issue 2, 2026, Pages 153-166]
Rahi, Abbas Torsional Vibration Reduction of a Rotor by Using Nonlinear Dual Dynamic Vibration Absorber [Volume 10, Issue 1, 2026, Pages 75-88]
Raissi, Kamran Modeling & Analysis of Environmental Orbit Perturbation and Budgeting Their Effect on Orbital Elements [Volume 10, Issue 1, 2026, Pages 3-28]
Raiyat-khaki, Ali Balance Control Ability Evaluation & Center of Pressure (COP) Classification with Machine Learning Methods [Volume 10, Issue 2, 2026, Pages 231-242]
Rezaei, Hamed Experimental Study on Stall Cell Formation in High-Wing Commercial Jet under Take-Off Conditions [Volume 10, Issue 2, 2026, Pages 167-178]
S
Sadedel, Majid Fatigue Diagnosis Utilizing the Support Vector Machine Classification of Wrist Electromyography Signals with Feature Selection [Volume 10, Issue 1, 2026, Pages 107-122]
Salehian, Mortaza Nonlinear Free Vibration Optimization of 2D Tri-axial Braided Composite Fan Blade via ANN, Analytical, FEM, and GA Combined Approach [Volume 10, Issue 3, 2026, Pages 353-378]
Salehipour, Morteza Hybrid Nonlinear Model Predictive Control of a Flexible Satellite [Volume 10, Issue 2, 2026, Pages 211-230]
Sayanjali, Mohammad Hybrid Nonlinear Model Predictive Control of a Flexible Satellite [Volume 10, Issue 2, 2026, Pages 211-230]
Sayyaf, Negin Towards Reliable Deep Reinforcement Learning for Industrial Applications: A DDPG-based Algorithm with Improved Performance [Volume 10, Issue 1, 2026, Pages 61-74]
Seif, Mohammad Reza Predicting the Deterioration Trend of Rolling Element Bearings through an Adaptive Relevance Vector Machine Utilizing Limited Historical Data [Volume 10, Issue 1, 2026, Pages 43-60]
Shaon, Syed Mehedi HassanTransient Natural Convection and Entropy Generation Analysis in a Stratified Square Enclosure [Volume 10, Issue 2, 2026, Pages 153-166]
Shariati, Mahmoud A review of the various effects of a vacuum environment on the fatigue behavior of metals [Volume 10, Issue 1, 2026, Pages 89-106]
Shinde, Mahesh SExperimental analysis of milled groove conformal cooling in injection molding [Volume 10, Issue 3, 2026, Pages 379-388]
Shooshtari, Alireza Experimental and Numerical Analysis of Electromagnetic Energy Harvester Based on a Vertical Magnetic Cantilever Beam [Volume 10, Issue 1, 2026, Pages 29-42]
Sisban, Saeedeh The novel analytical model of low-temperature hydrogen/oxygen reactor on platinum catalytic surface in different micro-porous mediums [Volume 10, Issue 3, 2026, Pages 269-296]
T
Taghilou, Mohammad Enhancing Thermo-Electrical Performance of Solid Oxide Fuel Cells through Multi-Channel Cooling System Analysis [Volume 10, Issue 2, 2026, Pages 179-198]
V
Vaziry, MohammadAli Experimental Study on Stall Cell Formation in High-Wing Commercial Jet under Take-Off Conditions [Volume 10, Issue 2, 2026, Pages 167-178]
Z
Zaidi, Syed Asad Ali Experimental And Numerical Analysis of Strain Rate Dependent Mechanical Behaviour of Fused Deposition Modelling (FDM) Printed Parts [Volume 10, Issue 3, 2026, Pages 319-336]
