A
-
Abbasi, Naser
Investigation of Laser Induced Plasma Assisted Ablation of Glass in Presence of Magnetic Field [Volume 6, Issue 3, 2022, Pages 401-414]
-
Abedi, Maryam
Transient Response of Laminated Composite Curved Beams with General Boundary Conditions under Moving Force [Volume 6, Issue 4, 2022, Pages 561-578]
-
Abedi, Mohsen
An Experimental Study on Fuzzy Controller Robustness Augmented by Fuzzy Supervisor for Cutting Force Control of End-Milling [Volume 6, Issue 2, 2022, Pages 167-178]
-
Adingwupu, A.
Evaluation of Micropolar Fluid Transport through Penetrable Medium: Effect of Flow and Thermal Slip [Volume 6, Issue 3, 2022, Pages 427-442]
-
Ahangari, Maryam
Numerical Simulation of Blood Flow in a Stented Aneurysm Using Lattice Boltzmann Method [Volume 6, Issue 2, 2022, Pages 229-248]
-
Ahmadi, Ahmad
Fluid-Structure Interaction During Viscoelastic Fluid Hammer Phenomenon in the Pipes [Volume 6, Issue 1, 2022, Pages 95-112]
-
Ahmadi, Ali
Transient Response of Laminated Composite Curved Beams with General Boundary Conditions under Moving Force [Volume 6, Issue 4, 2022, Pages 561-578]
-
Akinshilo, A. T.
Evaluation of Micropolar Fluid Transport through Penetrable Medium: Effect of Flow and Thermal Slip [Volume 6, Issue 3, 2022, Pages 427-442]
-
Amiri-Jaghargh, Ali
Direct Simulation Monte Carlo Analysis of Flow in Knudsen Pumps with Square-Shaped Wall Roughness [Volume 6, Issue 1, 2022, Pages 77-94]
-
Arab Solghar, Alireza
Experimental Study on the Wear of Liner in Tumbling Mill under Dry and Wet Conditions [Volume 6, Issue 3, 2022, Pages 331-340]
B
-
Barati, Fariborz
Accurate Estimating of Mechanical Properties of Austenitic Stainless Steels with Residual Stresses Using Indentation Technique [Volume 6, Issue 4, 2022, Pages 511-524]
-
Bayareh, Morteza
Numerical Study of Kelvin-Helmholtz Instability of Newtonian and Non-Newtonian Fluids [Volume 6, Issue 2, 2022, Pages 249-260]
-
Behroozsarand, Alireza
Hybrid Neural Network and Particle Swarm Optimization Model Applied to Assist Production Planning in a Large Petrochemical Plant [Volume 6, Issue 4, 2022, Pages 491-510]
-
Beigzadeh, Borhan
Synthesis of a Six-Link Mechanism for Generating the Ankle Motion Trajectory Using Shadow Robot Control Method [Volume 6, Issue 2, 2022, Pages 189-200]
-
Bruijn, Sjoerd M
Comprehensive Evaluation of Human Hand Manipulability During Walking at Different Speeds [Volume 6, Issue 2, 2022, Pages 179-188]
D
-
Danesh, Mohammad
Design of Robust Proportional-(Proportional-Derivative) Controller for an Autonomous Underwater Vehicle Using Quantitative Feedback Theory in the Diving Plane [Volume 6, Issue 3, 2022, Pages 363-386]
-
Davari, Ali R.
Impact of Canard on the Flowfield over the Wing in Various Flow Regimes [Volume 6, Issue 1, 2022, Pages 113-128]
E
-
Ebadian, Mohammad
Numerical and Thermodynamic Study of a Gas Turbine Cycle with Evaporative Cooling [Volume 6, Issue 2, 2022, Pages 279-292]
-
Esmaeili, Sajad
Effects of Shape Memory Alloys and Carbon Nanotubes on the Nonlinear Aerothermal Flutter Characteristics of Hybrid Nanocomposite Beam [Volume 6, Issue 2, 2022, Pages 217-228]
-
Etemadi, M.
Analytical Modeling of the Stretching in the Bimetallic Materials Produced by Equal Channel Angular Pressing [Volume 6, Issue 1, 2022, Pages 3-14]
F
-
Farajzadeh, Reyhaneh
Numerical Study of Kelvin-Helmholtz Instability of Newtonian and Non-Newtonian Fluids [Volume 6, Issue 2, 2022, Pages 249-260]
-
Feli, Saeed
Low Velocity Impact Response of Sandwich Beams with Composite Face-Sheets and Foam or Honeycomb Core: Analytical Modeling and Finite Element Simulation [Volume 6, Issue 3, 2022, Pages 341-362]
G
-
Gandjalikhan Nassab, S. A.
Convection Enhancement Using Composite Vortex Generator [Volume 6, Issue 1, 2022, Pages 149-164]
-
Gandjalikhan Nassab, S. A.
Combined Action of Gas Radiation and Airfoil Shaped Ribs in Improvement of Solar Heater Performance [Volume 6, Issue 2, 2022, Pages 293-312]
-
Ghassabi, Ghodrat
Numerical and Thermodynamic Study of a Gas Turbine Cycle with Evaporative Cooling [Volume 6, Issue 2, 2022, Pages 279-292]
-
Goudarzi, Sahar
Two-Phase Simulation of Magnetohydrodynamics and Ferrohydrodynamics Impacts on the Natural Convection of a Magnetic Nanofluid within a Porous Cavity [Volume 6, Issue 1, 2022, Pages 129-148]
H
-
Haghjoo, Mohammad Reza
Synthesis of a Six-Link Mechanism for Generating the Ankle Motion Trajectory Using Shadow Robot Control Method [Volume 6, Issue 2, 2022, Pages 189-200]
-
Hajiloo, Amir
Comprehensive Evaluation of Human Hand Manipulability During Walking at Different Speeds [Volume 6, Issue 2, 2022, Pages 179-188]
-
Hakimi, Alireza
Effects of Shape Memory Alloys and Carbon Nanotubes on the Nonlinear Aerothermal Flutter Characteristics of Hybrid Nanocomposite Beam [Volume 6, Issue 2, 2022, Pages 217-228]
-
Hasannezhad, Hossein
Experimental Study on Puncture Resistance of 2D and 3D Glass Fabrics Reinforced with Shear Thickening Fluid [Volume 6, Issue 1, 2022, Pages 31-44]
-
Heidari, Hamidreza
Effects of Shape Memory Alloys and Carbon Nanotubes on the Nonlinear Aerothermal Flutter Characteristics of Hybrid Nanocomposite Beam [Volume 6, Issue 2, 2022, Pages 217-228]
-
Heidari, Mehdi
Analysis of the Effect of Indenter Deformation and Presence of Voids on Silicon Nanoindentation Using Molecular Dynamics Simulation [Volume 6, Issue 2, 2022, Pages 201-216]
-
Hoseini Sarvari, Seyed Masoud
Inverse Reconstruction of Absorption-Coefficient Distribution in a Two-Dimensional Radiative Medium from the Knowledge of Wall Heat Fluxes [Volume 6, Issue 3, 2022, Pages 415-426]
-
Hosseini, Mohammad
Stability Analysis of a Functionally Graded Carbon Nanotube Reinforced Composite Plate Integrated with Piezoelectric Layers under Supersonic Airflow [Volume 6, Issue 4, 2022, Pages 525-544]
-
Hosseini, Seyed Vahid
Analysis of the Effect of Indenter Deformation and Presence of Voids on Silicon Nanoindentation Using Molecular Dynamics Simulation [Volume 6, Issue 2, 2022, Pages 201-216]
J
-
Jahangirian, alireza
A New Metaheuristic Method with Applications to Airfoil Shape Optimization [Volume 6, Issue 2, 2022, Pages 261-278]
-
Javadi, Masoud
Nonlinear Flutter Analysis of Porous Functionally Graded Plate in Yawed Hypersonic Flow [Volume 6, Issue 1, 2022, Pages 59-76]
-
Jeddi, Mohsen
Experimental Study on Puncture Resistance of 2D and 3D Glass Fabrics Reinforced with Shear Thickening Fluid [Volume 6, Issue 1, 2022, Pages 31-44]
K
-
Karevan, Mehdi
Polylactic Acid /High-Ratio Natural Kenaf Fiber Biocomposite Sheets Processed by Calendering Melt Mixing Technique [Volume 6, Issue 3, 2022, Pages 387-400]
-
Karvan, Poorya
Low Velocity Impact Response of Sandwich Beams with Composite Face-Sheets and Foam or Honeycomb Core: Analytical Modeling and Finite Element Simulation [Volume 6, Issue 3, 2022, Pages 341-362]
-
Khajehzadeh, Mohsen
Investigation of Laser Induced Plasma Assisted Ablation of Glass in Presence of Magnetic Field [Volume 6, Issue 3, 2022, Pages 401-414]
-
Khalafi, Vahid
Nonlinear Flutter Analysis of Porous Functionally Graded Plate in Yawed Hypersonic Flow [Volume 6, Issue 1, 2022, Pages 59-76]
-
Khavasi, Ehsan
Triply Periodic Minimal Surfaces Scaffolds and Their Comparison with Cancellous Bone: Fluid Flow Point of View [Volume 6, Issue 3, 2022, Pages 443-466]
L
-
Lashkarbolook, Mohsen
Fluid-Structure Interaction During Viscoelastic Fluid Hammer Phenomenon in the Pipes [Volume 6, Issue 1, 2022, Pages 95-112]
M
-
Mahdiyar, Nafise
Analysis of the Effect of Indenter Deformation and Presence of Voids on Silicon Nanoindentation Using Molecular Dynamics Simulation [Volume 6, Issue 2, 2022, Pages 201-216]
-
Majidi Jirandehi, aliakbar
Experimental Study on the Wear of Liner in Tumbling Mill under Dry and Wet Conditions [Volume 6, Issue 3, 2022, Pages 331-340]
-
Majidi-Mozafari, Kazem
Stability Analysis of a Functionally Graded Carbon Nanotube Reinforced Composite Plate Integrated with Piezoelectric Layers under Supersonic Airflow [Volume 6, Issue 4, 2022, Pages 525-544]
-
Meshkat, Seyyed Salar
Hybrid Neural Network and Particle Swarm Optimization Model Applied to Assist Production Planning in a Large Petrochemical Plant [Volume 6, Issue 4, 2022, Pages 491-510]
-
Miripour Fard, Behnam
Comprehensive Evaluation of Human Hand Manipulability During Walking at Different Speeds [Volume 6, Issue 2, 2022, Pages 179-188]
-
Mirnezhad, Nadia
Direct Simulation Monte Carlo Analysis of Flow in Knudsen Pumps with Square-Shaped Wall Roughness [Volume 6, Issue 1, 2022, Pages 77-94]
-
Moein Addini, M
Convection Enhancement Using Composite Vortex Generator [Volume 6, Issue 1, 2022, Pages 149-164]
-
Moharrami, Rasoul
Accurate Estimating of Mechanical Properties of Austenitic Stainless Steels with Residual Stresses Using Indentation Technique [Volume 6, Issue 4, 2022, Pages 511-524]
N
-
Naderi, Ali Asghar
Blast Resistance of an Innovative Helmet Liner Composed of an Auxetic Lattice Structure [Volume 6, Issue 1, 2022, Pages 45-58]
-
Navardi, Mohammad Mahdi
A Proposed Approach to Simulate Thin Quadrilateral Plates Using Generalized Differential Quadrature Method Based on Kirchhoff–Love Theory [Volume 6, Issue 1, 2022, Pages 15-30]
-
Norouzi, Banafsheh
Fluid-Structure Interaction During Viscoelastic Fluid Hammer Phenomenon in the Pipes [Volume 6, Issue 1, 2022, Pages 95-112]
-
Norouzi, Mahmood
Fluid-Structure Interaction During Viscoelastic Fluid Hammer Phenomenon in the Pipes [Volume 6, Issue 1, 2022, Pages 95-112]
-
Nouri, Hossein
Development of Theoretical Model to calculate Steam Hammer Force on Shock Absorber in Multi Series Pipeline [Volume 6, Issue 3, 2022, Pages 315-330]
P
-
Parandvash, Ali
Triply Periodic Minimal Surfaces Scaffolds and Their Comparison with Cancellous Bone: Fluid Flow Point of View [Volume 6, Issue 3, 2022, Pages 443-466]
-
Parvaz, Hadi
Analysis of the Effect of Indenter Deformation and Presence of Voids on Silicon Nanoindentation Using Molecular Dynamics Simulation [Volume 6, Issue 2, 2022, Pages 201-216]
Q
-
Qaderi, Alireza
Direct Simulation Monte Carlo Analysis of Flow in Knudsen Pumps with Square-Shaped Wall Roughness [Volume 6, Issue 1, 2022, Pages 77-94]
R
-
Rafeeyan, Mansoor
Design of Robust Proportional-(Proportional-Derivative) Controller for an Autonomous Underwater Vehicle Using Quantitative Feedback Theory in the Diving Plane [Volume 6, Issue 3, 2022, Pages 363-386]
-
Rafiei, Ashkan
Numerical Evaluation on Blood Rheological Behavior in a Realistic Model of Aneurysmal Coronary Artery [Volume 6, Issue 4, 2022, Pages 579-596]
-
Rashidi, Ali Mohammad
Analytical Modeling of the Stretching in the Bimetallic Materials Produced by Equal Channel Angular Pressing [Volume 6, Issue 1, 2022, Pages 3-14]
-
Razfar, Mohammad Reza
Investigation of Laser Induced Plasma Assisted Ablation of Glass in Presence of Magnetic Field [Volume 6, Issue 3, 2022, Pages 401-414]
-
Rezaei, Morteza
Triply Periodic Minimal Surfaces Scaffolds and Their Comparison with Cancellous Bone: Fluid Flow Point of View [Volume 6, Issue 3, 2022, Pages 443-466]
-
Rezaei, s.mehdi
Investigation of Laser Induced Plasma Assisted Ablation of Glass in Presence of Magnetic Field [Volume 6, Issue 3, 2022, Pages 401-414]
-
Rezazade, Marzie
Numerical Simulation of Blood Flow in a Stented Aneurysm Using Lattice Boltzmann Method [Volume 6, Issue 2, 2022, Pages 229-248]
S
-
Sadr Lahijani, Mohammad Homayoun
A Proposed Approach to Simulate Thin Quadrilateral Plates Using Generalized Differential Quadrature Method Based on Kirchhoff–Love Theory [Volume 6, Issue 1, 2022, Pages 15-30]
-
Safari, Farhad
Design of Robust Proportional-(Proportional-Derivative) Controller for an Autonomous Underwater Vehicle Using Quantitative Feedback Theory in the Diving Plane [Volume 6, Issue 3, 2022, Pages 363-386]
-
Safavi, Seyed Alireza
A Parametric Investigation of Melting Process within a Porous Medium under Local Thermal Non-Equilibrium Condition Using Lattice Boltzmann Method [Volume 6, Issue 3, 2022, Pages 467-488]
-
Saidi, Maysam
Numerical Evaluation on Blood Rheological Behavior in a Realistic Model of Aneurysmal Coronary Artery [Volume 6, Issue 4, 2022, Pages 579-596]
-
Sarfaraz Khabbaz, Roohollah
Influencing Parameters on Tensile Modulus Characterization of Unidirectional Composite Laminates Using Digital Image Correlation Technique [Volume 6, Issue 4, 2022, Pages 545-560]
-
Shahverdi, Hossein
A Proposed Approach to Simulate Thin Quadrilateral Plates Using Generalized Differential Quadrature Method Based on Kirchhoff–Love Theory [Volume 6, Issue 1, 2022, Pages 15-30]
-
Shakib, Seyyed Ehsan
Numerical and Thermodynamic Study of a Gas Turbine Cycle with Evaporative Cooling [Volume 6, Issue 2, 2022, Pages 279-292]
-
Sobamowo, M. G.
Evaluation of Micropolar Fluid Transport through Penetrable Medium: Effect of Flow and Thermal Slip [Volume 6, Issue 3, 2022, Pages 427-442]
-
Soltani, M.
Impact of Canard on the Flowfield over the Wing in Various Flow Regimes [Volume 6, Issue 1, 2022, Pages 113-128]
-
Soltanipour, Hossein
Two-Phase Simulation of Magnetohydrodynamics and Ferrohydrodynamics Impacts on the Natural Convection of a Magnetic Nanofluid within a Porous Cavity [Volume 6, Issue 1, 2022, Pages 129-148]
T
-
Taghilou, Mohammad
A Parametric Investigation of Melting Process within a Porous Medium under Local Thermal Non-Equilibrium Condition Using Lattice Boltzmann Method [Volume 6, Issue 3, 2022, Pages 467-488]
-
Tanzadeh Panah, Mahboube
Inverse Reconstruction of Absorption-Coefficient Distribution in a Two-Dimensional Radiative Medium from the Knowledge of Wall Heat Fluxes [Volume 6, Issue 3, 2022, Pages 415-426]
V
-
Vali, Ashkan
Synthesis of a Six-Link Mechanism for Generating the Ankle Motion Trajectory Using Shadow Robot Control Method [Volume 6, Issue 2, 2022, Pages 189-200]
W
-
Wood, David . A
Hybrid Neural Network and Particle Swarm Optimization Model Applied to Assist Production Planning in a Large Petrochemical Plant [Volume 6, Issue 4, 2022, Pages 491-510]
Y
-
Yazdani, Mojtaba
Experimental Study on Puncture Resistance of 2D and 3D Glass Fabrics Reinforced with Shear Thickening Fluid [Volume 6, Issue 1, 2022, Pages 31-44]
-
Yekani Motlagh, Saber
Two-Phase Simulation of Magnetohydrodynamics and Ferrohydrodynamics Impacts on the Natural Convection of a Magnetic Nanofluid within a Porous Cavity [Volume 6, Issue 1, 2022, Pages 129-148]
Z
-
Zarei Aziz, Amirreza
Influencing Parameters on Tensile Modulus Characterization of Unidirectional Composite Laminates Using Digital Image Correlation Technique [Volume 6, Issue 4, 2022, Pages 545-560]
Your query does not match with any item