Author Index

A

  • Abbaspour, Fatemeh Vibration analysis of piezoelectric graphene platelets micro-plates [Volume 5, Issue 3, 2021, Pages 361-386]
  • Abbassi, Abbas Evaluation of cooling air distribution system at Amirkabir University’s high-speed data processing center [Volume 5, Issue 1, 2021, Pages 153-172]
  • AbdolMohammadi, masoud Active Vibration Control of a Nonlinear System with Optimizing The Controller Coefficients Using Metaheuristic Algorithms [Volume 5, Issue 4, 2021, Pages 511-534]
  • Aghanajafi, Cyrus Optimization Techniques for Design a shell and tube heat exchanger from an economic viewpoint [Volume 5, Issue 2, 2021, Pages 313-328]
  • Ahmadi, Habib Inverse kinematic of European Robotic Arm based on a new geometrical approach [Volume 5, Issue 1, 2021, Pages 13-48]
  • Ahmadi, Habib Finite duration HIV treatment using mixed antiretroviral therapy and immunotherapy [Volume 5, Issue 2, 2021, Pages 239-254]
  • Ahmadi, Habib Active Vibration Control of a Nonlinear System with Optimizing The Controller Coefficients Using Metaheuristic Algorithms [Volume 5, Issue 4, 2021, Pages 511-534]
  • Ahmadi Danesh Ashtiani, Hosein Optimization Techniques for Design a shell and tube heat exchanger from an economic viewpoint [Volume 5, Issue 2, 2021, Pages 313-328]
  • Aminfar, Kiyarash Thermal stability analysis of cylindrical thin-walled tanks subjected to lateral fire loading [Volume 5, Issue 2, 2021, Pages 265-280]
  • Anwar Beg, Osman Multi-Objective Optimal Design of an Organic Rankine Cycle Plate Heat Exchanger with Phase Change [Volume 5, Issue 4, 2021, Pages 617-638]
  • Arjangpay, Azadeh An experimental investigation on low-velocity impact response of nanoclay-reinforced fiber metal laminates [Volume 5, Issue 3, 2021, Pages 427-438]
  • Arvin, Hadi Vibration analysis of piezoelectric graphene platelets micro-plates [Volume 5, Issue 3, 2021, Pages 361-386]
  • A. Shirazi, Farzad Suspension Design Optimization of a Hermetic Compressor for Improved Vibrational Behavior [Volume 5, Issue 4, 2021, Pages 497-510]
  • Atashkari, Kazem Evaluation of energy potential of municipal solid waste gasification in different regions of Iran by using a modified equilibrium thermodynamic model [Volume 5, Issue 2, 2021, Pages 281-296]

B

  • Bahari, Ali Evaluation of energy potential of municipal solid waste gasification in different regions of Iran by using a modified equilibrium thermodynamic model [Volume 5, Issue 2, 2021, Pages 281-296]
  • Barati, Ebrahim Experimental investigation on laminar convective heat transfer of nano ferrofluids under constant and alternating magnetic field [Volume 5, Issue 3, 2021, Pages 477-494]
  • Barazandeh, Farshad Numerical and experimental investigation of effective parameters on separation force in bottom-up stereolithography process [Volume 5, Issue 3, 2021, Pages 401-418]

C

  • Chamanmeymandi, Saideh Nonlinear vibration control of smart plates using nonlinear modified positive position feedback approach [Volume 5, Issue 1, 2021, Pages 49-76]

D

  • Danesh Mehr, Ali Reza Thermal stability analysis of cylindrical thin-walled tanks subjected to lateral fire loading [Volume 5, Issue 2, 2021, Pages 265-280]
  • Davari, Ali R. Assessment of Fountain Flow Effects on Two Non-Overlap Tandem Rotors Performance [Volume 5, Issue 1, 2021, Pages 173-190]
  • Dehdari, Amir An experimental investigation on low-velocity impact response of nanoclay-reinforced fiber metal laminates [Volume 5, Issue 3, 2021, Pages 427-438]
  • Dehghani, Reza Optimum design and comparison of four soft reinforced actuators by Taguchi experimental design method [Volume 5, Issue 3, 2021, Pages 387-400]
  • Divband, Baharak Arsenic Removal from Aqueous Solutions using Iron Oxide-modified Zeolite: Experimental and Modeling Investigations [Volume 5, Issue 1, 2021, Pages 141-152]

E

  • Ekrami, Amir Hassan Series Flat Plate Pulsating Heat Pipe: Fabrication and Experimentation [Volume 5, Issue 4, 2021, Pages 639-654]
  • Emami, Alireza Model-based Data-driven Structural Health Monitoring of a Wind Turbine Blade [Volume 5, Issue 1, 2021, Pages 97-108]
  • Emam-jomeh, Erfan Experimental investigation on laminar convective heat transfer of nano ferrofluids under constant and alternating magnetic field [Volume 5, Issue 3, 2021, Pages 477-494]
  • Esmaeili, Saeed A Mitral Heart Valve Prototype Using Sustainable Polyurethane Polymer: Fabricated by 3D Bioprinter, Tested by Molecular Dynamics Simulation [Volume 5, Issue 1, 2021, Pages 109-120]

F

  • Farazin, Ashkan A Mitral Heart Valve Prototype Using Sustainable Polyurethane Polymer: Fabricated by 3D Bioprinter, Tested by Molecular Dynamics Simulation [Volume 5, Issue 1, 2021, Pages 109-120]
  • Fatahian, Esmaeel Computational fluid dynamics modeling of effect of dipleg geometry on separation efficiency of a square cyclone [Volume 5, Issue 3, 2021, Pages 451-464]
  • Fatahian, Hossein Computational fluid dynamics modeling of effect of dipleg geometry on separation efficiency of a square cyclone [Volume 5, Issue 3, 2021, Pages 451-464]
  • Fesharakifard, Rasul Virtual Manual Arc Welding by Real-Time Process Simulation for an Effective Training [Volume 5, Issue 1, 2021, Pages 121-140]
  • Fesharakifard, Rasul Numerical and experimental investigation of effective parameters on separation force in bottom-up stereolithography process [Volume 5, Issue 3, 2021, Pages 401-418]

G

  • Gandjalikhan Nassab, S. A. Investigation of Gas Radiation Effect on Thermal Behavior of Solar Gas Heaters under High Irradiation [Volume 5, Issue 4, 2021, Pages 655-668]
  • Ghadiri, Matin Experimental investigation on laminar convective heat transfer of nano ferrofluids under constant and alternating magnetic field [Volume 5, Issue 3, 2021, Pages 477-494]
  • Ghalibafan, Javad Active Vibration Control of a Nonlinear System with Optimizing The Controller Coefficients Using Metaheuristic Algorithms [Volume 5, Issue 4, 2021, Pages 511-534]
  • Ghamkhar, Ghazal A Review of the Different Standard Methods of Measuring the Tubular Braiding Angle [Volume 5, Issue 4, 2021, Pages 571-582]
  • Gharanjik, Aziz Mohammad Effects of gas temperature rise on steady state behavior of non-circular two-lobe micro gas bearings [Volume 5, Issue 3, 2021, Pages 343-360]
  • Gholami, Peyman Buckling Analysis of Stiffened Cross-Ply Laminated Conical Shells under Axial Compression Using Generalized Differential Quadrature Method [Volume 5, Issue 4, 2021, Pages 535-552]

H

  • Hadad Baygi, Seyed Mahdi A hybrid optimal-base fuzzy-proportional-integral-derivative controller for vibration mitigation of structural system against earthquake [Volume 5, Issue 2, 2021, Pages 193-214]
  • Hadinejad, Aliakbar Virtual Manual Arc Welding by Real-Time Process Simulation for an Effective Training [Volume 5, Issue 1, 2021, Pages 121-140]
  • Haghighi Yazdi, Mojtaba Mechanical effect of double-level degeneration of lumbar spine discs by finite element method [Volume 5, Issue 1, 2021, Pages 77-96]
  • Hamedi, Mohsen Force frequency effect in square quartz crystals [Volume 5, Issue 2, 2021, Pages 215-226]
  • Hashemian, Seyed Majid Multi-Objective Optimal Design of an Organic Rankine Cycle Plate Heat Exchanger with Phase Change [Volume 5, Issue 4, 2021, Pages 617-638]
  • Heidari, Hamidreza Support parameters design of Jeffcoat rotor using nonlinear energy sink & H∞ method [Volume 5, Issue 2, 2021, Pages 227-238]
  • Hosseini Toudeshky, Hossein A Review of the Different Standard Methods of Measuring the Tubular Braiding Angle [Volume 5, Issue 4, 2021, Pages 571-582]
  • Hosseinzadeh, Ali Synthesis of a pure FeAl with a density greater than 95% of theoretical density by optimizing effective factors [Volume 5, Issue 2, 2021, Pages 329-340]
  • Houshyar, Meraj A Novel AA3105-Sic Composite Fabrication Method [Volume 5, Issue 4, 2021, Pages 583-598]

J

  • Jalili, Sina Thermal stability analysis of cylindrical thin-walled tanks subjected to lateral fire loading [Volume 5, Issue 2, 2021, Pages 265-280]
  • Jamshidi Aval, Hamed A Novel AA3105-Sic Composite Fabrication Method [Volume 5, Issue 4, 2021, Pages 583-598]
  • Janghorban, Amir Optimum design and comparison of four soft reinforced actuators by Taguchi experimental design method [Volume 5, Issue 3, 2021, Pages 387-400]
  • Joneidi Yekta, Hamed A Mitral Heart Valve Prototype Using Sustainable Polyurethane Polymer: Fabricated by 3D Bioprinter, Tested by Molecular Dynamics Simulation [Volume 5, Issue 1, 2021, Pages 109-120]

K

  • Kamyab-Moghadas, Bahareh A Mitral Heart Valve Prototype Using Sustainable Polyurethane Polymer: Fabricated by 3D Bioprinter, Tested by Molecular Dynamics Simulation [Volume 5, Issue 1, 2021, Pages 109-120]
  • Karimi, Mahdi An experimental investigation on temperature distribution in high-speed milling of AZ91C magnesium alloy [Volume 5, Issue 3, 2021, Pages 419-426]
  • Kazeroni, Zeinabalsadat Sadat A Mitral Heart Valve Prototype Using Sustainable Polyurethane Polymer: Fabricated by 3D Bioprinter, Tested by Molecular Dynamics Simulation [Volume 5, Issue 1, 2021, Pages 109-120]
  • Khalilpourazary, Saman Application of alumina/graphene nanocomposite to enhance the surface quality of Al7175-T74 specimens [Volume 5, Issue 2, 2021, Pages 255-264]
  • Khandan, Amirsalar A Mitral Heart Valve Prototype Using Sustainable Polyurethane Polymer: Fabricated by 3D Bioprinter, Tested by Molecular Dynamics Simulation [Volume 5, Issue 1, 2021, Pages 109-120]
  • Khatamian, Masoumeh Arsenic Removal from Aqueous Solutions using Iron Oxide-modified Zeolite: Experimental and Modeling Investigations [Volume 5, Issue 1, 2021, Pages 141-152]
  • Khoshhal, Razieh Synthesis of a pure FeAl with a density greater than 95% of theoretical density by optimizing effective factors [Volume 5, Issue 2, 2021, Pages 329-340]
  • Kogani, Ali Suspension Design Optimization of a Hermetic Compressor for Improved Vibrational Behavior [Volume 5, Issue 4, 2021, Pages 497-510]
  • Kouchakzadeh, Mohammad Ali Buckling Analysis of Stiffened Cross-Ply Laminated Conical Shells under Axial Compression Using Generalized Differential Quadrature Method [Volume 5, Issue 4, 2021, Pages 535-552]

M

  • Mahjoob, Mohammad Suspension Design Optimization of a Hermetic Compressor for Improved Vibrational Behavior [Volume 5, Issue 4, 2021, Pages 497-510]
  • Mahmoodi Targhi, Reza Multi-Objective Optimal Design of an Organic Rankine Cycle Plate Heat Exchanger with Phase Change [Volume 5, Issue 4, 2021, Pages 617-638]
  • MahmoudiMehr, Javad Evaluation of energy potential of municipal solid waste gasification in different regions of Iran by using a modified equilibrium thermodynamic model [Volume 5, Issue 2, 2021, Pages 281-296]
  • Mahnama, Maryam Model-based Data-driven Structural Health Monitoring of a Wind Turbine Blade [Volume 5, Issue 1, 2021, Pages 97-108]
  • Mehrabi, Ali Assessment of Fountain Flow Effects on Two Non-Overlap Tandem Rotors Performance [Volume 5, Issue 1, 2021, Pages 173-190]
  • Mehrpour, Saeed Reza Mechanical effect of double-level degeneration of lumbar spine discs by finite element method [Volume 5, Issue 1, 2021, Pages 77-96]
  • Meshkat, Seyed Salar Application of alumina/graphene nanocomposite to enhance the surface quality of Al7175-T74 specimens [Volume 5, Issue 2, 2021, Pages 255-264]
  • Mirzaei-Ghasabe, Hojjat Synthesis of a pure FeAl with a density greater than 95% of theoretical density by optimizing effective factors [Volume 5, Issue 2, 2021, Pages 329-340]
  • Moein Addini, Maryam Investigation of Gas Radiation Effect on Thermal Behavior of Solar Gas Heaters under High Irradiation [Volume 5, Issue 4, 2021, Pages 655-668]
  • Mohammadi, Mohammad Mostafa Force frequency effect in square quartz crystals [Volume 5, Issue 2, 2021, Pages 215-226]

N

  • Nahvi, Ali Virtual Manual Arc Welding by Real-Time Process Simulation for an Effective Training [Volume 5, Issue 1, 2021, Pages 121-140]
  • Narimani, Mahdi Evaluation of cooling air distribution system at Amirkabir University’s high-speed data processing center [Volume 5, Issue 1, 2021, Pages 153-172]
  • Nazari, Mostafa Finite duration HIV treatment using mixed antiretroviral therapy and immunotherapy [Volume 5, Issue 2, 2021, Pages 239-254]
  • Noghabi, Mohammad Buckling Analysis of Stiffened Cross-Ply Laminated Conical Shells under Axial Compression Using Generalized Differential Quadrature Method [Volume 5, Issue 4, 2021, Pages 535-552]
  • Norouzi, Mahmood Multi-Objective Optimal Design of an Organic Rankine Cycle Plate Heat Exchanger with Phase Change [Volume 5, Issue 4, 2021, Pages 617-638]
  • Nosuhi, Reza An experimental investigation on temperature distribution in high-speed milling of AZ91C magnesium alloy [Volume 5, Issue 3, 2021, Pages 419-426]
  • Nourouzi, Salman A Novel AA3105-Sic Composite Fabrication Method [Volume 5, Issue 4, 2021, Pages 583-598]

O

  • Orang, Ali Mechanical effect of double-level degeneration of lumbar spine discs by finite element method [Volume 5, Issue 1, 2021, Pages 77-96]

P

  • Pourkeramat, Alireza Thermal stability analysis of cylindrical thin-walled tanks subjected to lateral fire loading [Volume 5, Issue 2, 2021, Pages 265-280]

R

  • Rashidi, Fariborz Evaluation of thermodynamics effect on mineral scale formation in water injection wells supported by laboratory experiments [Volume 5, Issue 3, 2021, Pages 439-450]
  • Rezaei, S. Mehdi Virtual Manual Arc Welding by Real-Time Process Simulation for an Effective Training [Volume 5, Issue 1, 2021, Pages 121-140]
  • Rezaeizadeh, Masoud Optimum design and comparison of four soft reinforced actuators by Taguchi experimental design method [Volume 5, Issue 3, 2021, Pages 387-400]
  • Rostami, Javad Optimum Diameter and Location of Pipes Containing Phase Change Materials in a Channel in Latent and Sensible Heat Transfer [Volume 5, Issue 4, 2021, Pages 599-616]

S

  • Saber-Samandari, Saeed A Mitral Heart Valve Prototype Using Sustainable Polyurethane Polymer: Fabricated by 3D Bioprinter, Tested by Molecular Dynamics Simulation [Volume 5, Issue 1, 2021, Pages 109-120]
  • Sabzpooshani, Majid Series Flat Plate Pulsating Heat Pipe: Fabrication and Experimentation [Volume 5, Issue 4, 2021, Pages 639-654]
  • Sadighi, Ali Model-based Data-driven Structural Health Monitoring of a Wind Turbine Blade [Volume 5, Issue 1, 2021, Pages 97-108]
  • Sadighi, Mojtaba Out of Plane Punch of Aluminum Hexagonal Honeycomb Using Flat Nose and Spherical Projectiles [Volume 5, Issue 4, 2021, Pages 553-570]
  • Safar Johari, Majid A Review of the Different Standard Methods of Measuring the Tubular Braiding Angle [Volume 5, Issue 4, 2021, Pages 571-582]
  • Safarpour, Pedram Support parameters design of Jeffcoat rotor using nonlinear energy sink & H∞ method [Volume 5, Issue 2, 2021, Pages 227-238]
  • Saidi, Maysam Numerical investigation of cardiac function parameters in left heart hemodynamics with stenosed mitral [Volume 5, Issue 3, 2021, Pages 465-476]
  • Salehi, Javad Application of alumina/graphene nanocomposite to enhance the surface quality of Al7175-T74 specimens [Volume 5, Issue 2, 2021, Pages 255-264]
  • Samian, Reza Numerical investigation of cardiac function parameters in left heart hemodynamics with stenosed mitral [Volume 5, Issue 3, 2021, Pages 465-476]
  • Sanaei, Leila Arsenic Removal from Aqueous Solutions using Iron Oxide-modified Zeolite: Experimental and Modeling Investigations [Volume 5, Issue 1, 2021, Pages 141-152]
  • Shafii, Mohammad Behshad Series Flat Plate Pulsating Heat Pipe: Fabrication and Experimentation [Volume 5, Issue 4, 2021, Pages 639-654]
  • Shajari, Mostafa Evaluation of thermodynamics effect on mineral scale formation in water injection wells supported by laboratory experiments [Volume 5, Issue 3, 2021, Pages 439-450]
  • Shakiba, Saeid Behavioral Modeling and Experimental Verification of a Smart Servomotor Used in a Thermal Control Louver of a Satellite Using Dynamic Neural Network [Volume 5, Issue 1, 2021, Pages 3-12]
  • Shakouri, Meisam Buckling Analysis of Stiffened Cross-Ply Laminated Conical Shells under Axial Compression Using Generalized Differential Quadrature Method [Volume 5, Issue 4, 2021, Pages 535-552]
  • Sharifnia, Mahnaz Finite duration HIV treatment using mixed antiretroviral therapy and immunotherapy [Volume 5, Issue 2, 2021, Pages 239-254]
  • Sheikhbahaei, Erfan A Mitral Heart Valve Prototype Using Sustainable Polyurethane Polymer: Fabricated by 3D Bioprinter, Tested by Molecular Dynamics Simulation [Volume 5, Issue 1, 2021, Pages 109-120]
  • Shoshtari, Alireza Nonlinear vibration control of smart plates using nonlinear modified positive position feedback approach [Volume 5, Issue 1, 2021, Pages 49-76]

T

  • Tahmasebpour, Maryam Arsenic Removal from Aqueous Solutions using Iron Oxide-modified Zeolite: Experimental and Modeling Investigations [Volume 5, Issue 1, 2021, Pages 141-152]
  • Tavana, Alireza Model-based Data-driven Structural Health Monitoring of a Wind Turbine Blade [Volume 5, Issue 1, 2021, Pages 97-108]
  • Telloo, Mahshid A Mitral Heart Valve Prototype Using Sustainable Polyurethane Polymer: Fabricated by 3D Bioprinter, Tested by Molecular Dynamics Simulation [Volume 5, Issue 1, 2021, Pages 109-120]

V

  • Varedi-Koulaei, Seyyed Mojtaba Active Vibration Control of a Nonlinear System with Optimizing The Controller Coefficients Using Metaheuristic Algorithms [Volume 5, Issue 4, 2021, Pages 511-534]
  • Vaziri, Seyyed Amirreza Multi-Objective Optimal Design of an Organic Rankine Cycle Plate Heat Exchanger with Phase Change [Volume 5, Issue 4, 2021, Pages 617-638]
  • Vedadi, Amirhosein Behavioral Modeling and Experimental Verification of a Smart Servomotor Used in a Thermal Control Louver of a Satellite Using Dynamic Neural Network [Volume 5, Issue 1, 2021, Pages 3-12]

Y

  • Yadegari, Farzad Numerical and experimental investigation of effective parameters on separation force in bottom-up stereolithography process [Volume 5, Issue 3, 2021, Pages 401-418]
  • Yarmohammad Tooski, Mehdi An experimental investigation on low-velocity impact response of nanoclay-reinforced fiber metal laminates [Volume 5, Issue 3, 2021, Pages 427-438]

Z

  • Zamanzadeh, Amin Inverse kinematic of European Robotic Arm based on a new geometrical approach [Volume 5, Issue 1, 2021, Pages 13-48]
  • Zare, Vahid Comparative thermoeconomic analysis of using different jet fuels in a turboshaft engine for aviation applications [Volume 5, Issue 2, 2021, Pages 297-312]
  • Zarei Mahmoudabadi, Mohsen Out of Plane Punch of Aluminum Hexagonal Honeycomb Using Flat Nose and Spherical Projectiles [Volume 5, Issue 4, 2021, Pages 553-570]